Hengstler Safety Relays 464

Hengstler Safety Relays 464

Hengstler Safety Relays 464 provides a solution for all those applications that involve a high number of electric switching contact. The safety relay is designed for the highest possible degree of reliability, robustness and a long electrical life-time. As a result, these safety relays can be used wherever high availability is essential, even at high switching loads.

To ensure that Hengstler relays as used in your applications carry on doing their job reliably for years, the quality of products bearing the HENGSTLER name is the highest priority. All our locations are certified to ISO 9001 and ISO 14001, and the entire product range is, as you would expect, in conformity with RoHS and REACH regulations.

For decades, HENGSTLER has been intensively involved in matters relating to forcibly guided, or captive, contacts and, as a result, with safety relays. Our large, international customer base benefits from this experienced gathered over many years when it comes to developing and manufacturing relays with forcibly guided contacts.

The DC drive system can be supplied as either a monostable or a bistable version. For special applications, it is possible to quote solutions in which the load current is fed direct to the relay coil, which enables the correct functioning of the load to be monitored. H-464 safety relays conform to EN 50205 standard, Application type A, and IEC EN 61810-1. In addition, these safety relays also meet the requirements for railway signal relays in accordance with UIC 736e.

Hengstler Safety Relays 464 Features

  • 8 or 10 contacts
  • 10 A switching and constant current
  • Drive available as DC monostable, DC bistable and as load-current controlled
  • Ambient temperatures -25 to +80 °C
  • Forcibly guided contacts to EN 50205, Application type A
  • Meets requirements for signal relays under UIC 736e
  • cULus and TÜV approvals

Another Article:

Specification

Function / Application Safety relay
Product line HENGSTLER
Relay family 464
Contact set forcibly guided
According EN 50205 Application type A
Ambient temperature [°C] -25 … +80 °C
Soldering heat resistance [°C] 260 °C
Max. soldering time [s] 5 s
Pins pre-soldered with Sn 100
Approval TÜV
cULus
Standards EN 50205
IEC 61810-1
UL 508
Meets the requirements RoHS
UIC 736
Number of NO contacts 2 … 8
Number of NC contacts 2 … 7
Number of CO contacts 0
Size 4-Mar
Dimensions L x W x H [mm] Size 3: 77,4 x 20,5 x 48,6 mm
Size 4: 87,4 x 20,5 x 48,6 mm
Housing dustproof (RT II)
Shock resistance NO / NC [g] 10/10 g
Puls duration (half sinus) 16 ms
Vibration resistance NO / NC [g] 10/10 g
Frequency range [Hz] 10 – 55 Hz
Operating time NC contact, contact opens [ms] 22 ms
Operating time NO contact, contact closes [ms] 29 ms
Releasing time NO contact, contact opens [ms] 5 ms
Releasing time NC contact, contact closes [ms] 7 ms
Mechanical service life (without load) 10,000,000 switching cycles
Connection type Solder pins for pcb
Coil: Wire
Fixing type Contact: Solder pins

Download Data Sheet: Safety Relays Type 464

Ref: hengstler.de

Share