Norgren Integrated valve and actuator control (IVAC) PeneumaticIndonesia Industrial Parts

Description

Norgren Integrated Valve and Actuator Control – IVAC – combines a linear actuator, a glandless control valve, two reed or solid state switches and speed controllers into one integrated product whilst still maintaining the dimension measurements in accordance with ISO 15552.

With IVAC utilising an integrated valve therefore reducing tubing requirements it offers increased energy efficiency saving energy usage by up to 50%, as well as reducing the number of parts needed to purchase, stock and install on your machine.

32 … 100 mm
Cylinders and mountings conform to ISO 15552
Complete functional unit with LED display
Central electrical connector, polarity-safe
Integrated 5/2 or 5/3 valve
Additional output ports (2 & 4)
Integrated flow regulator for speed control
Integrated reed or solid state switches
Protection class IP67, suitable for food and beverage sector
Energy efficient

Specification

Medium:
- Compressed air, filtered,lubricated or non-lubricated Particles size: Class 7,ISO 8573 – 1 (dated 2001) Humidity and water content: Air supply must be dry.Corresponding of the application and working conditions the airmust be dry enough to avoid condensate. The pressure dewpoint must be minimum15° under the application and working conditions. Oil: Class4, ISO 8573 – 1 (dated 2001)
Standard:
- Based on ISO 15552 (length , mounting pitch and thread dimensions according to ISO 15552. Some outside dimensions different to ISO 15552)
Operation: Double acting, magnetic piston,adjustable cushioning
Operating pressure: 2 … 8 bar (29 … 116 psi)Port size:G1/8, G1/4, G3/8
Cylinder diameters: 32, 40, 50, 63, 80, 100 mm
Standard strokes: See below
Non-standard strokes: Available (25 … 1000 mm)
Operating temperature:-2 … +70°C max. (+28 … +158°F)
Supply voltage: 24 V d.c.
Multipole connection: M12 x 1 male, 8 pin
Power consumption: 1 W max
Rating: 100 % E.D.
Protection class: IP 67
Life expectation of the cylinder: *1)
- Stroke < 100 mm: 10 Mio. Cycles
- Stroke > 100 mm: 5000 km
Life expectation of the solenoid valves: 50 Mio. Cycles
Materials:
Profile barrel: anodised aluminium,
End covers: pressure diecast anodised aluminium
Piston rod: stainless steel, see datasheet
Piston rod seals: PUR
Piston seals: PUR
O-rings: NBR

*1) Life expectation based on laboratory conditions (more details upon request):- Operating pressure: 8 bar- Compressed air: ISO 8573-1, Class 7-4-4- Ambient temperature: 20° C +/-10° C- Environment: Industrial plant, no contaminationsuch as dust and/or moisture or similar- Position: horizontal- Side load: max. transverse load approx. 1,3% of the theoretical force at 6 bar- Speed: 1,0 m/s for Ø 32 to 50 mm 0,7 m/s for Ø 63 to 100 mm- Frequency: < 20 cycles / min (in/out)

Doenload Datasheet: Nogren Integrated valve and actuator control (IVAC), cleanline profile,

Read Another Article :