The Burkert valve 6026 is a direct-acting, media-separated 2/2-way plunger valve. The thermal and hermetic isolation of the coil and body by means of stainless steel bellows allows both extreme medium temperatures as well as aggressive media. This design avoids the build-up of condensation between the fluid part and coil or an unacceptable heating up or freezing of the coil.
The coils of burkert valve 6026 are moulded with chemically resistant epoxy. The valve is therefore particularly suitable for applications with critical media. The use of highly resistant body and seal materials such as stainless steel and PTFE make the valve suitable for critical chemical applications.
The burkert valve 6026 is supplied with a coil equipped with “Kick and Drop” (KD) electronics featuring double coil technology. In combination with a plug to DIN EN 175301 – 803 Form A, the valves satisfy degree of protection IP65. This product can be combined with Cable Plug Type 2518.
Features
- Media-separated plunger valves up to DN12
- Suitable for high and low temperature ranges (-200 °C…+180 °C)
- Energy-saving double coil technology with “Kick and Drop” variant
Specifications
Product properties
| Dimensions | Detailed information can be found in chapter “3. Dimensions” on page 4 of datasheet |
| Materials | |
| Sea | PTFE |
| Body | Brass with stainless steel seat 1.4581 |
| Stainless steel with stainless steel seat 1.4581 | |
| Metal bellows | Stainless steel 1.4541 |
| Weight | 1.1 kg |
Performance data
| Duty cycle | Continuous operation 100% ED Intermittent operation 50% ED max. 6 switchings/minute |
Electrical data
| Operating voltage | 24 UC |
| 110…120 V/50…60 Hz 230…240 V/50…60 Hz | |
| Voltage tolerance | Max. ±10% |
| Power consumption | 85/8 W |
Medium data
| Medium temperature | -200 °C…+180 °C |
| Operating medium | Neutral gases and fluidics |
| Viscosity | Ca. 21 mm2 /s |
Approvals and certificates
| Protection class | IP65 with cable plug |
Process/Port connection & communication
| Electrical connection | Tag connector acc. to DIN EN 175 301-803 Form A (see “5.4. Ordering chart accessories” on page 7 of datasheet) |
Environment and installation
| Installation position | As required, preferably with actuator upright |
| Ambient temperature (max.) | +55 °C |
Power Consumption
| Orifice | KV value water | Pressure range | Power consumption | Response times | ||
| [mm] | [m3 /h] | [bar] | Inrush [W] | Hold [W] | Opening [ms] | Closing [ms] |
| 03.00 | 00.25 | 0…10 | 85 | 8 | 100…200 | 300…500 |
| 04.00 | 00.50 | 0…10 | ||||
| 05.00 | 0,045138889 | 0…10 | ||||
| 06.00 | 0,055555556 | 0…10 | ||||
| 08.00 | 0,0625 | 0…10 | ||||
| 10.00 | 01.50 | 0…5 | ||||
| 12.00 | 0,097222222 | 0…3 | ||||
Download Datasheet: Burkert Type 6026 2/2-way Plunger Valve
Reference: burkert.com
Read More Articles :
- Burkert General Purpose 2/2 Solenoid Valves
- Burkert Type 6281 Servo-assisted 2/2 Way Diaphragm Valve
- Burkert Type 5282 Servo-assisted 2/2-way Diaphragm Valve
- Burkert Type 6407 Servo-assisted 2/2-way Piston Valve
- Burkert Type 6724 2/2 or 3/2-way Whisper Valve