Omron E2EY Aluminum Detecting Proximity Sensor use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models.
OMRON Sensing Components detect, measure, analyze, and process various changes that occur on productions sites, such as changes in position, length, height, displacement, and appearance. They also contribute to predicting and preventing future events.
Omron E2EY Aluminum Detecting Features
- Non-ferrous metals, such as aluminum and brass, are detected. *
- Ferrous metals, such as iron and nickel, are not
- Aluminum foil, however, cannot be detected.
Rating and Specifications
| Item Model | E2EY-X4C1 | E2EY-X8C1 | |
| Sensing distance | 4 mm ±10% | 8 mm ±10% | |
| Set distance | 0 to 2.8 mm | 0 to 5.6 mm | |
| Differential travel | 20% max. of sensing distance | ||
| Detectable object | Non-ferrous metal (Does not detect ferrous metal.) | ||
| Standard sensing object | Aluminum: 18 ´ 18 ´ 1 mm | Aluminum: 30 ´ 30 ´ 1 mm | |
| Response frequency * | 70 Hz | ||
| Power supply voltage (operating voltage range) | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
| Current consumption | 20 mA max. | ||
| Control output | Load current | NPN open-collector output, 100 mA max. (at 30 VDC) | |
| Residual voltage | 2 V max. (Load current: 100 mA, Cable length: 2 m) | ||
| Indicators | Detection indicator (red) | ||
| Operation mode (with sensing object approaching) | Load ON: NO (Refer to the timing charts under I/O Circuit Diagrams on page 3 for details.) | ||
| Protection circuits | Reverse polarity protection, Load short-circuit protection, Surge suppressor | ||
| Ambient temperature range | Operating/Storage: -10 to 55°C (with no icing or condensation) | ||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||
| Temperature influence | ±20% max. of sensing distance at 23°C in the temperature range of -10 to 55°C | ||
| Voltage influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range | ||
| Insulation resistance | 50 MÙ min. (at 500 VDC) between current-carrying parts and case | ||
| Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
| Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | ||
| Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant | ||
| Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
| Weight (packed state) | Approx. 140 g | Approx. 190 g | |
|
Materials | Case | Nickel-plated brass | |
| Sensing surface | Heat-resistant ABS | ||
| Clamping nuts | Nickel-plated brass | ||
| Toothed washer | Zinc-plated iron | ||
| Accessories | — | ||
- The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
Ref: Omron.com
Other Article:
- Omron 2 Wire Proximity Sensor
- Omron 3 Wire Proximity Sensor
- Omron E2EY Alumunium Detecting Proximity Sensor
- Deep Sea Electronics DSE103
- APG IRU-5000 Short Range 79 Inches Ultrasonic Level Senso
