E2F Omron Resin case Proximity Sensor

Omron Proximity Sensor

E2F Omron Resin case Proximity Sensor use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models.

E2F Proximity Sensor are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.

Features

IP68
Mutual interference prevention with models with different frequencies is also

Specifications

Model		E2F-X1R5E@ E2F-X1R5F@ E2F-X1R5Y@	E2F-X2E@ E2F-X2F@ E2F-X2Y@	E2F-X5E@ E2F-X5F@ E2F-X5Y@	E2F-X10E@ E2F-X10F@ E2F-X10Y@
Item
Sensing distance		1.5 mm ±10%	2 mm ±10%	5 mm ±10%	10 mm ±10%
Set distance		0 to 1.2 mm	0 to 1.6 mm	0 to 4 mm	0 to 8 mm
Differential travel		10% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 3.)
Standard sensing object		Iron, 8 ´ 8 ´ 1 mm	Iron, 12 ´ 12 ´ 1 mm	Iron, 18 ´ 18 ´ 1 mm	Iron, 30 ´ 30 ´ 1 mm
Response frequency *1		E/F Models: 2 kHz, Y Models: 25 Hz	E/F Models: 1.5 kHz, Y Models: 25 Hz	E/F Models: 600 Hz, Y Models: 25 Hz	E/F Models: 400 Hz, Y Models: 25 Hz
Power supply voltage (operating voltage range)		E/F Models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
		Y Models: 24 to 240 VAC (20 to 264 VAC)
Current consumption		E/F Models: 17 mA max.
Leakage current		Y Models: 1.7 mA max. at 200 VAC (Refer to Engineering Data on page 3.)
Control output	Load current	E/F Models: 200 mA max. Y Models: 5 to 100 mA		E/F Models: 200 mA max. Y Models: 5 to 300 mA
	Residual voltage	E/F Models: 2 V max. (Load current: 200 mA, Cable length: 2 m) Y Models: Refer to Engineering Data on page 3.
Indicators		E1 Models: Detection indicator (red), E2/F1/F2 Models: Operation indicator (red) Y Models: Operation indicator (red)
Operation mode (with sensing object approaching)		E1/F1/Y1 Models: NO Refer to the timing charts under I/O Circuit Diagrams on page 4 for details. E2/F2/Y2 Models: NC
Protection circuits		E/F Models: Reverse polarity protection, Load short-circuit protection, Surge suppressor; Y Models: None
Ambient temperature range		Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95%
Temperature influence		±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence		E/F Models: ±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range Y Models: ±1% max. of sensing distance at rated voltage in rated voltage ±10% range
Insulation resistance		50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		E/F Models: 1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case Y Models: (M8 Models): 2,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case (Other M8 Models): 4,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP68, in-house standards: oil-resistant *2
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 40 g	Approx. 50 g	Approx. 130 g	Approx. 170 g
	Case
	Sensing surface	Polyarylate resin
Materials	Clamping nuts	Polyacetal
Accessories		Instruction manual