Description of Gastec SG-1 Flue Gas Measuring Kit
This kit is recommended by the Japanese Environmental Agency for the detection of exhaust gases. This kit is mostly used at sources of smog, including diesel engines and turbines. Sulfur dioxide, nitrogen oxide, and oxygen are the three gases for which the GASTEC SG-1/SG-2 monitoring equipment has been approved.
SO2, NO2, and O2 in smoke can be measured.
- Measurements of SO2,NO2, and O2, in smoke and soot
- Measurement is completed in less than 60 seconds, enabling the measured results to be known on the spot.
- No special technology, knowledge, or skill are required.
- Excellent repeatability. The difference in results obtained by different persons is small.
- Both the initial cost and running costs are low, and maintenance is unnecessary.

Detector Tube
Sulphur dioxide (5M, 5L), oxides of nitrogen (11HA, 11S), oxygen (31B)?* In addition to these substances, there are about 300 types including CO and CO2.
The substance to be measured | Tube no. & name | Measuring range (ppm) | Scale range (ppm) | No. of tests per box | Detector tube type | Notes | |
Nitrogen oxides | 11HA | Nitrogen oxides | 50-2500 | (50)-2500 | 10 | Short-term measurement | |
11S | Nitrogen oxides | 5-625 | (10)-250 | 10 | Short-term measurement | ||
Oxygen | 31B | Oxygen | 3-24% | 6-24% | 5 | Short-term measurement | For preventing oxygen depletion |
Sulphur dioxide | 5M | Sulphur dioxide | 20-3600 | 100-1800 | 10 | Short-term measurement | |
5L | Sulphur dioxide | 1.25-200 | 5-100 | 10 | Short-term measurement |
For More Information and Price : Gastec SG-1 Flue Gas Measuring Kit
Read More Articles:
- Flange resistance thermometer – TP 17 / TP 18 Hengesbach
- Hengesbach Inductive conductivity / concentration transmitter INDUTEC
- Hengesbach Temperature Measurement
- Hengesbach Pressure Measurement
- Hengesbach TPS Smalline Pressure Transmitters
You must be logged in to post a comment.