Hengesbach TPS Smalline Pressure Transmitters

Hengesbach TPS Smalline Pressure Transmitters

Thanks to their design, the flush-mounted Hengesbach TPS Smalline pressure transmitters are suitable for pressure and level measurements with little dead space, even with crystallizing or viscous media.

The Hengesbach TPS Smalline Pressure Transmitters in stainless steel housings are available in protection class IP 65 and can optionally be encapsulated. The electrical connection is made via a cable socket or alternatively via an M12 connector.

Pressure Transmitter TPS - Smalline
Pressure Transmitter TPS – Smalline

Hengesbach TPS Smalline pressure transmitters High-temperature versions in continuous operation up to 200 ° C are available. Vacuum resistance is given. The compact standard housing is made of stainless steel. Corresponding weld-in sleeves and application-specific process connections are available.

In addition to flush versions for sanitary and general industrial applications, versions with a pressure gauge connection and attached diaphragm seals are also available. The devices of the Hengesbach TPS Smalline pressure transmitters are suitable for many applications in the industrial sector due to the wide range of connection options.

Features:

  • with internal and external measuring cell
  • ideal for broadband industrial applications for process printing
  • Measuring ranges from 0.35 bar to 30 bar, for relative and absolute pressure measurements
  • Use of food and pharmaceutical compliant materials
  • optional for high medium temperatures up to 200 ° C

Another Article:

Specification:

General Information

Manufacturer/ Device Hengesbach / Pressure Transmitter TPS
Measuring Principle/ Device Type TPS piezoresistive, For Pressure and Level Measurement

Entrance 

Measuring Range TPS
Normal Size (bar) Relative ISN Absolute ISN 
0,35 bar 1 0,35 bar 1
1 bar 3 1 bar 3
2,5 bar 8 2,5 bar 8
5 bar 15 5 bar 15
10 bar 30 10 bar 30
30 bar 90 30 bar 90
Setting Range 
(Via Potentiometer)
zero      ± 10% (FS)
span     ± 20% (FS)
Overload Protection -1 bar und 3-facher Messendwert, höhere ÜSI auf Anfrage
Burst Pressure  10 times the full scale value depending on the device type and nominal measuring range

Output

Output Signal 4…20 mA, 2 wire     Load:   ≤ (VB – 12 V) /0,02 mA
Influence of the river £ ± 0,15% max
Current Limitation 25 mA typ., 32 mA max.
Integration Time 0 … 20 sec.

Measurement Accuracy

Reference Condition DIN  IEC 60770
Linearity incl. Hysteresis and Repeatability and n.d Limit Point Method DIN IEC 770 ≤ = 0,3% of the value of the nominal measuring. In the case of small absolute pressure measuring ranges, specifications for linearity are particularly necessary
Warm-up time 1 sec.
Response Time (without damping) 320 ms (mains frequency 50 Hz selected) or 266 ms (mains frequency 60 Hz selected)
Long Term Drift £ 1% v. EW
Repeatability £ 0,05 % v. EW
Hysteresis £ 0,1% v. EW
Thermal Hysteresis Zero Point and measuring span in the compensated temperature range 0…80°C.
≤ ± 0,2% of EW / 10 K for nominal measuring range from 4 bar
≤ ± 0,3% of EW / 10 K for nominal measuring range 0,6 bar
Nominal Position > 1 bar any

Auxiliary Power 

Supply Voltage 13-36 VDC, max. permissible residul ripple 1 V …
Supply Voltage Influence ≤ ± 0,03%. Supply Voltage Change

Condition Of Use

Medium Temperature -35°C… + 125°C, 140°C max. für 1 h (Type HT für Temperaturen bis 200°C)
Ambient Temperature -35°C… +85°C
Storage Temperature  -35°C… +85°C
Protection class acc. EN 60529 – IP 65 (with connector according to EN 175301-803 up to A)
– IP 67 (with permanently attached reference cable)
Electromagnetic compatibility EMC guidelines according to EN 50081-2 / 50082-2 are fulfilled, CE mark

Constructive structure

Design Standard housing
material Standard housing made of 1.4301
Process connections made of 1.4404
Electrical connection Standard: connector acc. EN 175301-803 type A
– optional: permanently connected reference cable, length 1m
– optional: circular connector M12 x 1
Process connections see dimensional drawings and ordering information
Filling liquid Silicone oil (food safe) AK100

Certificate

Declaration of conformity on request

Ref: Hengesbach.com

Share