Seametrics LevelSCOUT Submersible Level / Temperature Smart SensorIndonesia Industrial Parts

Introduction

Seametrics LevelSCOUT Submersible Level/Temperature Smart Sensor is an integrated datalogger and level/temperature sensor and is ideal for site assessments, tidal studies, environmental monitoring, surface water discharge measurement, and aquifer level monitoring, as well as aquifer storage and recovery. This sensor networks with all of the Seametrics Smart Sensor family.

This industry standard digital RS485 interface device records up to 50,000 records of level, temperature, and time data, operates with low power, and features easy-to-use software with powerful features. Constructed with 316 stainless steel or grade 2 titanium, acetal, and fluoropolymer, this sensor provides high-accuracy readings in rugged and corrosive field conditions.

The LevelSCOUT is an absolute sensor, requiring no vent tubes, desiccant, or bellows. It can be paired with a BaroSCOUT barometric sensor and used with the Aqua4Plus 2.0 Barometric Compensation Utility to adjust the LevelSCOUT readings for current atmospheric pressure.

A replaceable 1/2 AA 3.6v lithium battery powers the LevelSCOUT. The unit is programmed using our easy-to-use control software. Once programmed the unit will measure and collect data at the time interval set.

While most will use the LevelSCOUT with Seametrics’ Aqua4Plus 2.0 software, it is by no means limited to that software. You can use your own Modbus® RTU software or logging equipment to read measurements via RS485, tying into your existing telemetry and control systems.

Seametrics LevelSCOUT Features

Measures/Records level and temperature
Low power — 4.5 year battery life
Replaceable battery
Modbus® RTU (RS485)
± 0.05% FS accuracy
Small diameter — 0.875” (2.22 cm)
50,000 record non-volatile memory
Barometric compensation utility
Free, easy-to-use Aqua4Plus 2.0, our new upgraded software

Applications

Site assessments
Tidal studies
Environmental monitoring
Surface water — discharge monitoring
Aquifer level monitoringAquifer storage & recovery

Seametrics LevelSCOUT Specification

General
Length (cabled version)	6.6” (16.7 cm)
Length (cableless version)	5.1” (12.9 cm)
Diameter	0.875” (2.22 cm)
Body Material	316 stainless steel or grade 2 titanium
Wetted Materials	316 stainless steel or grade 2 titanium, acetal, fluoropolymer
Communication	RS485 Modbus® RTU
Direct Modbus Read Output	32-bit IEEE floating point
Internal Math	32-bit floating point
Operating Temp. Range	-20° C to 60° C
Storage Temp. Range	-40° C to 80° C
Regulatory
Logging
Memory	50,000 records
Logging Rate	1x per second
Software	Complimentary Aqua4Plus 2.0
File Formats	csv / .a4d
Power
Internal Battery	One replaceable 1/2 AA 3.6V lithium battery
Expected Battery Life	4.5 years (depending on use)
Temperature
Element Type	Thermistor
Accuracy	± 0.1° C(from -20° C to 60° C)
Resolution	0.01° C
Units	Celsius, Fahrenheit, Kelvin
Pressure (Level)
Transducer Type	Silicon strain gauge
Transducer Material	316 stainless steel or Hastelloy® C276
Ranges	Absolute¹
	PSI : 30, 50, 100, 300
	FtH₂O : 35, 81, 196, 658
	mH₂O : 10, 24, 59, 200
Units	PSI, FtH2O, inH2O, cmH2O, mmH2O, mH2O, inHg, cmHg, mmHg, Bars, mBars, kPa
Accuracy	± 0.05% FS (@ 20° C)
Accuracy	± 0.10% FS (0° C to 40° C)
Resolution	0.0034% FS (typical)
Maximum Operating Pressure	1.1 x FS
Over Range Protection	3x FS (for >300 psi², 1.75 FS)
Burst Pressure	600 psi (approx. 1350 ft or 410 m)