Wenglor K1R87PCT2 Retro Reflex Sensor is a reflector that must be used in combination with these sensors. Wenglor has the right retro-reflex light barrier for every application. Even crystal-clear objects and sheet products can be reliably recognized. The sensor is easy to install with its integrated M18 threaded fixation and can be easily protected as well. Time delay can be activated by the RS-232 interface.
Features at a Glance
- Recognition of clear glass
- Dynamic readjustment of the switching threshold
- Simple installation
- Teach-in, external teach-in
Electrical Data
- Supply Voltage 10 … 30 V DC
- Current Consumption (Ub = 24 V) < 40 mA
- Switching Frequency 1,700 Hz
- Response Time 250 µs
- On-/Off-Delay (RS-232) 0 … 5 s
- Temperature Drift < 5 %
- Temperature Range -10 … 60 °C
- Switching Output Voltage Drop < 2.5 V
- PNP Switching Output/Switching Current 200 mA
- Residual Current Switching Output < 50 µA
- Short Circuit Protection yes
- Reverse Polarity Protection yes
- Overload Protection yes
- Lockable yes
- Teach Mode MT
- Protection Class III
Applications
Dynamic Pressure Monitoring of Vials with Retro-Reflex Sensors for Transparent Objects
Before filling and packaging in the pharmaceuticals industry, vials must be counted and their exact number and position monitored on an infeed conveyor. A retro-reflex sensor for transparent objects is mounted transversely to the side wall for this so-called dynamic pressure monitoring. If the sensor detects a jam, it regulates the belt speed so that no further vials are conveyed. Once the bottleneck is cleared, the normal quantity of vials is conveyed again.
Retro-Reflex Sensors for Transparent Objects
Specifications
Optical Data | |
|---|---|
| Range | 4,000 mm |
| Reference Reflector/Reflector Foil | RQ100BA |
| Clear Glass Recognition | yes |
| Switching Hysteresis | < 5 % |
| Light Source | Red Light |
| Polarization Filter | yes |
| Service Life (T = +25 °C) | 100,000 h |
| Max. Ambient Light | 10,000 Lux |
| Opening Angle | 5 ° |
| Single-Lens Optic | yes |
Mechanical Data | |
|---|---|
| Setting Method | Teach-In |
| Housing Material | Plastic |
| Full Encapsulation | yes |
| Degree of Protection | IP67 |
| Connection | M12 × 1; 4-pin |
Output | |
|---|---|
| PNP NO | yes |
| RS-232 with Adapterbox | yes |
Adjustable parameters | |
|---|---|
| Circuit | NC NC/NO NO |
| Other parameters | Off-delay On-delay |
For More Information and Price: Wenglor K1R87PCT2 Retro Reflex Sensor
Read More Articles:
- Abacus Instruments Temperature Multi-Purpose Alarm MPA-2 Series
- Abacus AICT20 Instruments Portable Transport Temperature Containers
- Abacus Instruments Climate Cabinet AIC126 Series
- Abacus Instruments Mini-Chart Temperature Recorder
- Amflow® PR15 Back Pressure Regulator
You must be logged in to post a comment.