Camsco TB-35 24 Hours Automatic Time SwitchIndonesia Industrial Parts

Description

Camsco TB-35 24 Hours Automatic Time Switch provides a wide selection of time switches to the world. CAMSCO’s automatic timer switches with several advantages, such as a direct reading clock type with a minute adjust knob to set the time precisely to the minute, a backup battery for 100 hours when power fails, and an attractive design.

Brief introductions of Camsco Electric 24 Hours Automatic Time Switch TB-35 :

TB-35
24 Hours Automatic Time Switch
CE APPROVAL

Camsco TB-35 Features

15-minute-Interval, 24-Hour Dial with Built-in (Embedded) Time Set Pins
- The embedded time0set pins permit switching on and off in 15-minute intervals (max.96 operations a day) for more precise control of loads.
There are 96 pins built into the dial, thus eliminating the danger of misplacement and the need to store or re-order time-set pins.
Direct Reading Clock Type with Minute Adjust Knob to Set Time Precisely to Minute
- The time can be set precisely to the minute by simply turning the minute adjust knob. This feature, combined with 15-minute interval operation settings, permits more precise load control.
Handy ON/AUTO/OFF select switch
- Allows selection of “MANUAL ON” or “MANUAL OFF” as desired, irrespective of the program. Very convenient for use on a test run or continuous operation for a long period of time.
Improved load capacity
- By the adoption of the highly reliable contact mechanism, the incandescent lamp load has substantially been improved from 3A on the current product (TB33) to 10A to eliminate such cases of trouble as fusing of the contact, etc.
Attractive design
- The sense of high quality and precision is expressed with the simple yet very attractive design.
Power supply indicator lamp
- The condition of the power supply to the time switch can be seen at a glance by means of the lamp.
The thinner case strong steel
- Outer dimensions : 105.5(W) x 150.5(H) x 44(D)mm

Camsco TB-35 Specifications

Model No. : TB-35
Movement Type: AC type
Rated Voltage : 110V AC / 220V AC / 240V AC
Voltage Tolerance : 85-120V / 170-240V / 220-260V
Frequency: 50/60Hz (Selectable)
Power Consumption: 1.5W
Time precision: Same as AC current frequency
Manual ON/OFF: ON/AUTO/OFF switch
Ambient Temperature : -10? ~ +50?
Resistive Load: 250V AC 15A
Lamp Load: 10A
Inductive Load : 12A (cos?=0.7 or more)
Motor Load : 110V AC 750W, 220V AC 1500W
Switch construction: SPST
Minimum Setting Unite: 15 minutes units
Minimum Setting Interval: 15 minutes
No. of ON-OFF Operations: 96 operations
Weight: 480g

Operating cautions

The precision and life of Time Switch are affected by environmental conditions. Please do not use it in the following areas :
– The ambient temperature is below -10 ? or over +50?
– The humidity is high
– There is dust or gas
– There is vibration or shock
– There is exposure to direct sunlight
Turn the knob in the direction (clockwise) indicated by the arrows. It cannot be turned in the opposite direction.
When a heater is connected to the load circuit, a thermostat switch must be included.
The Time Switch must be grounded when used in the conditions as follows:
– The input power supply is 220V AC or more.
– High humidity is expected in the place.

Reference: www.camsco.com.tw

Another Article: