Information of Measurement, Equipment, Mechanical, Electrical & Control
Information of Measurement, Equipment, Mechanical, Electrical & Control
Description Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market. Since 1990, new developments in the Level Measure have given a new […]
Description Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market. Since 1990, new developments in the Level Measure have given a […]
Description Bamo BAMONIV TPS Hydrostatic Level Transmitter is designed for hydrostatic level measurement in aggressive media that is clear or slightly contaminated. Wet parts are of PVDF or PP, the seal of FPM and the cable of FEP. It measures the level according to the principle of hydrostatic pressure measurement. The probe is suspended with […]
Description Bamo PVDF BAMONIV Hydrostatic Level Transmitter is designed for level measurement on aggressive, viscous or contaminated liquids in non-pressurized tanks. It operates according to the principle of hydrostatic pressure measurement. The pressure on the sensor increases proportionally with the depth of immersion. BAMONIV integrates ceramic cell and delivers a 4-20 mA signal proportional to […]
Description Bamo INTERNIV 590 Level Electronic Gauge for Diesel is simplest by use of a fitting on tank and/or a junction box BJSC. The probe may be freely suspended. It is recommended not to let the probe laying down on the tank bottom to avoid deposits on the diaphragm. Junction box BJSC, pressure compensated, hold […]
Overview Bamo BJSC Atmospheric Pressure Balanced is carried out by means of the cable gland, centered below the fitting. For aggressive chemicals, it is recommended to use the model BJSC-A with a PVDF cable gland. A vent filter on the front of housing, insures a good balance with atmospheric pressure for hydrostatic level sensors. Bamo […]
