Information of Measurement, Equipment, Mechanical, Electrical & Control
Information of Measurement, Equipment, Mechanical, Electrical & Control
Description Bamo MAXIMAT TC1 is a signaling unit for overfill and leakage detectors MAXIMAT (X series) and MAXITOP. The detector is powered directly by TC1 unit. The built-in buzzer provides local alarm to the operator, and the LEDs inform visually about the alarm status. The audible alarm is acknowledged through the push-button on the right […]
Description Bamo CST / KRC Relays for Maximat and Capsytron is a product from Bamo. This product comes from level categories. This relay is for compact overfill sensors, level switches, pumps protection. The supply power isolator relay CST is convenient to use when no 24 V DC main supply available on site. The coupling relay […]
Description Bamo MAXIMAT TC4 has built in self test, survey of the connected sensors and the complete alarm processing – accordingly to approval guidelines for overfill sensors. Note: The function test with the external push button does not replace the annual operation test. Bamo MAXIMAT TC4 Features 4 surveying channels For compact overfill or leakage […]
Description Bamo MAXIMAT SHR CS power supply and alarm signal relay SHR CS (DIN rail mounting) is specially designed for the new MAXIMAT leakage and overfill transmitters and liquid filling of pipes sensors CAPSYTRON SFL. It is useful with the previous range MAXIMAT SU and VK. It assures a continuous survey of the measurement loop, […]
Description Bamo MAXIMAT VK C Level Compact Overfill Sensor is designed to detect conductive liquids non electrically conductive. The detection results from position of a magnet inside the float and a Reed contact. The liquids may not generate deposit originating jamming of float. The MAXIMAT has 3 different outputs, factory built-in: Binary output to active […]
Description Bamo MNR 7/4074 Magnetic Level Controller has a magnetic equipment, a guiding stem with built-in Reed contact, fitting and head housing. Magnetic equipment includes 2 fixed magnets and between a float with a built-in magnet. Magnets are all covered by PTFE, non-porous quality. Magnetic equipment is designed to keep the float close to lower […]
