Description The Linde HMF-02 motor is a high-pressure fixed displacement motor for open and closed loop operation. Secondary valves enable customised definition of soft motor start-up and slowdown. With dual setting secondary valves the maximum acceleration and braking torque is additionally available. The settings and shifting ranges can be adjusted according to project-specific requirements, see […]
Description ]Linde HMR-02 hydraulic In conventional drives the torque of the hydraulic motor can be transmitted to the cardan shaft only by means of a dropbox. For further optimization of the drive train Linde Hydraulics developed the Through-Drive Motor. Based on the standard hydraulic motor of the Series 02 with just one shaft end, the […]
Description Linde CMV Series 02 motors from Linde Hydraulics are different from those common in the market. They can provide the required torque even at low speeds and make it possible to start smoothly and sensitively. Therefore, additional gear ratios for rpm reduction are not necessary. This reduces the amount of parts going into the […]
Description Standard hydraulic motors at low speeds in their starting phase cannot generate the necessary torque. Therefore, the power of the fast spinning hydraulic motors has to be reduced by means of several step gearboxes down to the speed needed on the wheel. Somewhat higher windage losses and poorer mechanical efficiency are benevolently accepted in […]
Description Linde Hydraulics develop, produce and globally supply modular drive systems consisting of hydraulics, power transmissions and electronics. As a leading technology provider in the field of high pressure hydraulics, the systems produced by us set the standard in terms of significantly reducing fuel consumption and CO2 emissions. Our product range comprises hydraulic pumps and […]
Description Together with the customer Linde Hydraulics defines new standards in technology. Advanced modular drive technology, realised in hydrostatic variators for variable speed transmission, form the core of power split gearboxes. Compact units with a hollow shafts are available for mounting to conventional gearboxes in smaller machines. These compact units are used as fully hydrostatic […]