Tival Sensors TS-RFS Level Limit Float Switch

Descriptions Tival Sensors TS-RFS Level Limit Float Switch, The float switch TS-RFK is designed to monitor level limits of liquids. For that purpose there are two firmly arranged reed contacts inside the guide tube which are defining the level limits respectively the switching points. The magnetic float which slides via the guide tube switches the […]

Tival Sensors TS-KGS Capacitive Level Limit Switch

Descriptions Tival Sensors TS-KGS Capacitive level limit switch.  The capacitive level limit switches TS-KGS are designed to monitor level limits of liquids in nonconductive plastic or glass vessels. The flexible polyurethane-housing is mounted with self adhesive layer directly on the vessel. The sensor has to be mounted on the height of the level limit which […]

Tival Sensors TS-NW3 Level Controller

Description Tival Sensors TS-NW3 Level Controller, The TS-NW3 level controler devices are level relays used for monitoring the levels of non-flammable electrical conductive liquids. The supply voltage must be applied to terminals A1 and A2 during operation of the devices. Single-terminal immersion electrodes are used for measuring the level limit values. The test circuit of […]

Tival Sensors TS-SG 51 Vibration Limit Switch

Description Tival Sensors TS-SG 51 Vibration Limit Switch, The vibrating fork is stimulated by the piezo drive on its resonance frequency. The vibrating fork resonance frequency drops on liquid level covering; this frequency change is interpreted by the internal electronics and changed into a switching signal. Two different electronic types are available: Besides the transistor […]

Tival Sensors TS-KNG Joint Lever Transmitter

Description Tival Sensors TS-KNG Joint Lever Transmitter, A swivel-mount magnet is attached to the lightweight joint lever with its floater. Fluid level differentials cause corresponding joint lever deflection. Magnet rotation is detected by an analog hall sensor and altered to a standardized signal by the microcontroller. The fluid level allocation can be set independently and […]