Fcon CUBEGM Series Gas Mixer

Feature

  • [CUBEGM Seires] is an all-in-one unit that has a mass flow controller, control power supply, valve, check valve and gas mixer.
  • Simply connect the piping to the INside and OUTside.
  • [CUBEGM Series] is a device that supplies a mixed gas species of 2, 3, 4 to set up and control to any of the flow rates.
  • Analog mass flow controller [1000 Series] is mounted as a standard feature.
  • The mass flow controller, which flow control range is from 10SCCM to 50SLM, can be mounted as a standard. In other cases, please contact us.
  • It can be reduced the cost when you use a Gas mixer than you purchase gas cylinders that have been prepared in the mixing ratio.
  • It can be used for a wide range of applications such as analysis, environment, bio, packaging, medical, gas welding.
  • Applicable gases: Inert gas. (For more information, please contact us)

Another Article:

Specification

Size CUBEGM2 : W315×D298×H250(mm) ※Except protrusion
CUBEGM3 : W415×D298×H250(mm) ※Except protrusion
CUBEGM4 : W515×D298×H250(mm) ※Except protrusion
Built-in MFC MFC1000 or FCST1000L (manufactured by Fujikin)
Gases Most gases (e.g., air, nitrogen, carbon dioxide, argon, hydrogen, helium, methane, oxygen)
Current consumption MAX 1A ※In the case of 4 mass flow controllers equipped with
Flow range* 10SCCM to 20SLM for one line (but the mixed gas flow of 50SLM or less)
Flow rate control MFC : C1000 Series or FCST1000L Series
Flow rate output signals 0-5VDC
Flow rate control range 1 LINE: F.S.10SCCM~20SLM (However, the mixed gas flow rate must be less than 50 SLM)
Operating differential pressure Conform to built-in mass flow controller specification
Pressure Resistance Conform to built-in mass flow controller specification
Operating environment 5-50°C (Accuracy guaranteed between 15-35°C), 30-80% RH (No condensation permitted)
Leak Integrity 1×10-7Pa・m3/sec (He)
Wetted surface material SUS316, PTFE, Fluoro-Rubber and built-in mass flow controller material
(FCST1000L Series: Magnetic stainless steel, Fluoro-Rubber or Chloroprene rubber)
Standard Fitting** 1/4in. SWL (equivalent), One-touch fittings
Inlet and outlet valves Ball valve
Mass flow control 10-turn potentiometer
Display Instantaneous flow: 4 digits
Input power AC85-264V
Accessory AC cable(2m), User’s manual, Written guarantee
  • At FCON, flow rates (SCCM, SLM) are converted to values at 0ºC, 101.3kPa abs (1atm) for calibration. Please contact us regarding detailed specifications for the gas type and flow range.

** For other fittings, please contact us.

May be changed items depend on the number of the mass flow controllers. The other specifications, please contact us.

Data Sheet: Fcon CUBEGM Gas Mixer

Reference:http://www.fcon-inc.jp/

 

author

Rudy Wiratama

rudywinoto.com/wmablog.com/flowmasonic.com

Similar Posts