Information of Measurement, Equipment, Mechanical, Electrical & Control
Information of Measurement, Equipment, Mechanical, Electrical & Control
Description Flow Meter Group FMT-Q Turbine Gas Meter are robust and designed to perform on the highest level of accuracy. The actual flow sensor, an exchangeable cartridge, has a build-in flow conditioner enabling the meter to be installed with standard (5 x DN) straight in- and outlet sections. The cartridge can be pre-calibrated, under both […]
Description Flow Meter Group FMT-DC Turbine Gas Meter is a unique meter, designed to perform on the highest level of accuracy. The meters comply with all international standards and are approved for custody transfer. The actual flow sensor, TWO cartridges which are exchangeable with conventional cartridges used in other turbine meter series, can monitor all […]
General Information Erdco Armor-Flo 3600 meters with integral transmitters provide an ideal combination – a local mechanical flow rate indicator independent of electrical supply with a 4-20 mA two-wire loop powered signal output. The output signal is linear within the middle 80% of the range. A response curve is furnished with each flowmeter. Simple design, […]
CS pressure switches have a built-in pressure operated, three-pole switch. The contact position of which depends on the pressure in the connector and the range setting and adjustable differential. The pressure switches are fitted with a manual switch that will lock the contact system in the open position independently of the pressure in the system. […]
Erdco Armor-Flo 3500 provides even more effective process control input with switching capabilities. Simple electromechanical switches define your process limits. Adjustable switches provide a positive indication of flow/no-flow conditions and may be positioned to actuate at specific flow rates. The design of the switch is to capture the indicator, preventing movement until the flow rate […]
Description An RT pressure switch contains a pressure operated single-pole changeover contact, the position of which depends on the pressure in the inlet connection and the set scale value. The RT series includes pressure switches for general applications within industrial and marine refrigeration. The RT series also includes differential pressure switches, pressure switches for neutral […]
