Description Bamo Cable Suspended Resistive Level Probes in open tank by electrodes, for instance acid storage tanks, barrage, waste water treatment plant, etc. The length of electrode cables is factory adjusted. The electrical resistance variation when the fluid touches the level electrode and the reference electrode, causes an ON/OFF signal through the relay ES 2001. Please […]
Description Bamo TVI and MINITEV with screw terminals and cable gland (Excepted on MINITEV), Fitting: AISI 316 L with PTFE insulator(s), Electrodes: AISI 316 L, 1 to 4 electrodes (according the model) at necessary length. Electrical connection: with end tip to the terminal. A ground connection is available inside the housing IP55. Bamo TVI and […]
Bamo STE Resistive Level Probe in combination with a relay ES2001 detect the level of electrically conductive liquids. According to the model, up to 5 levels may be triggered (using the tank as the reference electrode) Provide a reference electrode if the tank is made of insulating material. These STE probes are not suitable for […]
Overview Bamo RXM 2851 Resistive Level Detector detects the difference of resistance between the detection electrode and the reference electrode when the liquid comes into contact. The reference can be the wall of the metal container or a second electrode. A DC voltage of 12V is applied between the electrode and the reference to carry […]
General Bamo GAD 531 Level Detection are designed for monitoring grease-water separators. The probe GP/10 detects when the thickness of floating greases over water, is greater than the permitted max. thickness. The alarm unit has an auto-diagnostic of system integrity. A relay output and an audible alarm inform the operator. The buzzer may be deactivated […]
Description Bamo RAC 531 Level Detection is designed for the monitoring of hydrocarbon fluids separators. With sensor, OP/10 (OP/5) the alarm device detects when the maximum thickness is reached. The alarm device has a built-in buzzer. A jumper may disable its function; in this configuration, the lighting alarm and relay output inform the current ALARM […]