The PE102 magmeter is designed for low-flow chemical injection or difficult-to-meter applications with pulsating metering pumps in 3/4” to 1/4” pipe/tube. The housing is made of sturdy splashproof HDPE plastic. With no moving parts, the PE102 can handle fluids containing particulate matter without clogging or jamming, keeping maintenance at a minimum. With no metallic parts […]
Description Insertion Electromagnetic Flow Meter EX80 Series are designed for use with conductive liquids in 1 to 12” pipe. A choice of materials (stainless steel, brass, and PVC) allows the meter to adapt to a range of temperature, pressure, and corrosive environments. The EX81 is an insertion electromagnetic flowmeter for use with conductive liquids in […]
Description The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 4” to 10” pipe. With no moving parts, these meters have unobstructed flow and are resistant to wear from debris found in-ground or surface water. There are no bearings or propeller to wear out. Minimal straight pipe requirements allow AG2000 flow meters to be used in piping […]
Description The WMP-Series is a full-bore, plastic-bodied electromagnetic flowmeter designed for flow and usage monitoring applications in 1 and 2-inch pipe. The polypropylene flow tube offers corrosion resistance to a wide range of chemicals. It is lightweight and easy to install or remove from the pipe for inspection*. Features No moving parts Minimal straight pipe […]
Ultrasonic Flow Meter | Water Flow Meter In-Line Ultrasonic Flow Meter High Dynamic Response Inline Ultrasonic Flowmeter The model SL3488 inline ultrasonic flowmeter ( here in after referred to as SL3488) is a true state-of-the-art transit-time flowmeter designed using PICOFLY technology and 0.01 nanosecond (10 picoseconds) resolution; the flow sample rate achieved is 256 discrete […]
Description The PE102 magnetic flow meter is designed for low-flow chemical injection or difficult-to-meter applications with pulsating metering pumps in 3/4” to 1/4” pipe/tube. The housing is made of sturdy splashproof HDPE plastic. With no moving parts, the PE102 can handle fluids containing particulate matter without clogging or jamming, keeping maintenance at a minimum. With […]