Description
HPT Series connectors are suitable for AC power supply where a durable latch locking connector is required. They are rated at 16A, 250 Vac. HPT Series connectors can be connected or disconnected under load and are IP65 rated.
Features:
- 2+PE contact layout
- Quick-release, vibration resistant latch lockable
- High impact UV resistant material
- True Mains Connector with Current Breaking Capacity (CBC)
- 16A current rating (20A USA)
- Industry-standard mating interface
- IP65 rated
- The US. Patents (10,186,804)(D839,193)(D840,341)
- UL498 certified
- UL50E enclosure type 4
STANDARD DATA HPT SERIES CONNECTORS
| VALUE | ||
| GENERAL CHARACTERISTICS | Number of contacts | 2+PE |
| Termination | ||
| – Cable Connector | 2mm Hex key screw terminal | |
| – Chassis Mount | Flat Tab 1/4” | |
| Flammability | UL94V-0 | |
| Environmental | Complies with EU RoHS 2 Directive 2011/65/EU | |
| ELECTRICAL CHARACTERISTICS | Rated Operating Voltage | 250VAC |
| Test Voltage AC RMS | 1500V | |
| Current carrying capacity | 16A (20A USA) | |
| Typical Contact Resistance | ?2m? | |
| Insulation Resistance (initial) | ?2G? | |
| Insulation Resistance (after damp heat test) | ?0.1G? | |
| CLIMATIC CHARACTERISTICS | Protection Class | IP65, UL50E enclosure type 4 (in mated or in combination with protective caps) |
| Operating Temperature | -25?C to +80?C (-13°F to +176°F) | |
| MECHANICAL CHARACTERISTICS | Weight** | |
| – Chassis Connector | 15g (0.033lb) / 25g (0.055lb) | |
| – Cable Plug | 40g (0.088lb) | |
| Typical Cable retention force | Subject to cable material and O.D. | |
| Cable O.D range | 6.0 -12.0 mm with lockable backshell | |
| 7.5 -16.0 mm with non-lockable backshell | ||
| Conductor Size | ||
| – Screw Terminals | 2.5mm² (AWG12) | |
| MATERIALS | Connector Shell / Finish | PA66 GF30 / Black |
| Insulators | PA66 GF30 | |
| Cable Boot / Backshell | Neoprene / PBT | |
| Contact Plug – Material / Plating | Copper Alloy / Silver | |
| Contact Chassis – Material / Plating | Copper Alloy / Silver | |
| Protective Caps | ||
| – Base | Santoprene, UV resistant | |
| – Overmolded Cap | PA66 & Santoprene, UV resistance | |
| – Chain | Stainless Steel SS304 | |
| Protective Caps (Self-closing) | ||
| – Base | Polycarbonate, UV resistant | |
| – Overmolded Cap | Polycarbonate & Santoprene, UV resistant | |
| – Gasket | Silicone Rubber | |
| – Spring | Stainless Steel SS304 | |
Download catalog: Amphenol Connector Catalog
Reference: Amphenol.com
Another Article:
- Asiantool A4H Electrical Rotating Connection
- TE ConnectivityHEE/HEE Connector Series for machine and Robotic
- Plugs and Jacks Amphenol T Series Switch Plug Connector
- Type of Connector from TE Connectivity
- flush-mounted Pressure and level Transmitter PZM 100/101 Series HengesbachNCS-162-RF-CH Nanaboshi Connector
- Power Connectors Amphenol HP Series
- Nanaboshi Connector NT-5012-PM12
- Plugs and Jacks Amphenol T Series Switch Plug Connector
- NT Series Electrical Connector Nanaboshi
- Battery Cell 18650 EVE