Saft LSP 26500-3F Lithium BatteryIndonesia Industrial Parts

Description

Saft’s LS 26500plus cell is ideally suited for long-term applications (typically from 5 to 20+ years), featuring low base currents and periodic pulses.

Benefits

High capacity and high energy (1175 Wh/l and 637 Wh/kg)
High voltage response, stable during most of the lifetime of the application
Wide operating temperature range (-60°C / + 85°C)
Low self-discharge compatible with long operating life (less than 1% after 1 year of storage at + 20°C)
Superior resistance to corrosion
Low magnetic signature

Key features

Bobbin construction
Well controlled passivation
Hermetic construction with glass-tometal seal
Stainless steel can
Non-flammable electrolyte
RoHS and REACH compliance
Made in France

Designed to meet all major quality, safety and environment standards

Safety: UL 1642, IEC 60086-4
ATEX: IEC 60079-11 part 10.5 (T4 temperature rating at + 40°C)
Transport: UN 3090 and UN 3091
Quality: ISO 9001, Saft Excellence System, continuous program

Typical Applications

Utility Metering
Internet of Things
Alarms and security
Medical devices
Tracking systems
Professional electronics

Storage

The storage area should be clean, cool (preferably not exceeding +30°C), dry and ventilated.

Warning

Fire, explosion and burn hazard.
Do not recharge, short circuit, crush, disassemble, heat above 100°C (212°F), incinerate, or expose contents to water.
Do not solder directly to the cell (use tabbed cell versions instead).
Do not remove the cells from their original packing before use.
Do not store the cells in bulk to avoid accidental short circuiting.
Do not mix new and used cells or cells from different origins.
Mind the polarities of the cell.

Electrical characteristics1

Nominal capacity (under 4 mA, +20°C, 2.0 V cut-off)3 8.5 Ah

Open circuit voltage (at +20°C) 3.67 V

Nominal voltage (under 0.5 mA, + 20°C) 3.6 V

Nominal energy 30.6 Wh

Pulse capability4 Up to 300 mA

Maximum recommended continuous current 150 mA

For battery sizing, consult Saft

Operating conditions

Operating temperature range5

Storage temperatures (max recommended)6

Physical characteristics2

Diameter (max) 26.0 mm (1.02 in)

Height (max) 50.4 mm (1.97 in)

Typical weight 47 g (1.65 oz)

Li metal content approx. 2.2 g

Customized cell connections

CN, CNR Radial tabs

2 PF, 3 PF, 3 PF RP, 4 PF Radial pins

CNA Axial leads

GCJ Connector

Other configurations upon request

1.Typical values relative to cells stored up to one year at + 30°C max.

Sleeved cell.
Dependent upon current drain, temperature, cut-off and cell orientation.
Under 300 mA / 0.1 second pulses, drained every 2 minutes at + 20°C from undischarged cells during 24 h, with 10 µA base current, yield voltage readings above 3.0 V after initial stabilisation. The readings may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions or for high pulse currents. Consult Saft.
Operation above ambient temperature may lead to reduced capacity and lower voltage readings. Consult Saft.
For more severe conditions, consult Saft.

For More Information And Price: Saft LSP 26500-3F Lithium Battery