Fcon 2000 series Digital Mass Flow Controller With Built-in Display

Feature

Built-in display setting unit, setting control is possible only with the main unit.
Driving power is DC24V single power supply (500mAor more adapter can be used).
Compact size to realize the small size and space-saving.
Simple installation to various equipment.
Digital communication: RS485 communication.
Analog signal: 0-5V and 4-20mA can be switched.
Equipped with an abnormal flow rate alarm function.
Equipped with accumulation function.
Digital Control Application Software.

Mass Flow Controller	C2005	C2020
Mass Flow Meter	M2005	M2020
Flow range (N2equivalent)	10 SCCM 5 SLM	10SLM	20SLM
Gases	Various Gases (Please consult about corrosive gas)
Valve type	NC: Normally Closed (Excluding Mass Flow Meter)
Flow rate control range	2-100 F.S (Excluding Mass Flow Meter)
Accuracy	±1 F.S (Accuracy guaranteed between 15-35)
Setting signal	Setting section of the main unit, Digital: RS485, Analog: 0-5V and 4.3-20mA can be switched (Excluding Mass Flow Meter)
Output signal	Main unit display: 7 segments LED, Digital: RS485, Analog: 0-5V and 4-20mA can be switched
Repeatability	±0.2 F.S
Response	2sec
Operating differential pressure	50-300KPa	100-300KPa	200-300KPa
Pressure resistance	1MPa(G)
Operating temperature	5-50, 85 RH (Scope of accuracy guarantee: 15-35)
Leak integrity	1×10^-7Pa m³/sec He
Mounting attitude	Free
Drive power source	+24VDC 500mA
Communication	RS485, Analog: 0-5V and 4-20mA can be switched
Wetted surface material	SUS316, PTFE, Fluoro-Rubber
Seal material	Fluoro-Rubber
Actuator system	Solenoid (excluding Mass Flow Meter)
Surface treatment	Machined finish
Standard fitting	1/4in.SWL (equivalent), One-touch tings, for another fitting, please contact us.