Bamo BR Metallic Flow ControllerIndonesia Industrial Parts

Description

Bamo BR Metallic Flow Controller controls the flow rate in a vertical pipe with the ascending flow; the Liquid must be free of particles. These blind-type controllers accept high operating pressures. The fluid passing through the controller, from bottom to top, drives a diver with a built-in magnet which actuates an external Reed contact, adjustable all along the body. The cylindrical diver moves inside a tube perforated with conical slots.

The setting of the trigger point is possible over the entire measuring range. The actual flow rate can be greater than the high range without damaging the device (it results in a higher pressure drop). These controllers must be installed far from any magnetic induction.

Bamo BR Metallic Flow Controller Features :

Vertical mounting
1 adjustable contact
Material: stainless steel or brass
Pressure limit: up to 300 bar
Flow ranges within 0.1 … 50 l/min

Application:

Control of flow in cooling, lubricating piping systems, or in any compatible skids.

Bamo BR Metallic Flow Controller Specification:

Temperature limits	-20 … +100 °C (On request: 160 °C)
Flow Ranges	l/min (of water at 20 °C)
Accuracy	±5%F.S.
Contact type	N.O. (without flow)
Protection	Contact: IP 65
Connection	DIN 43650 plug-in socket, cable gland PE 9
Brass version
Pressure limit	200 bar
Body	Nickel-plated brass
Fittings	Nickel-plated brass
Diver	Nickel-plated brass
Seals	NBR (On request: FPM or EPDM)
Stainless steel version
Pressure limit	300 bar
Body	AISI 316 Ti (1.4571)
Fittings	AISI 316 Ti (1.4571)
Diver	AISI 316 Ti (1.4571)
Seals	FPM (On request: NBR or EPDM)