Maeda Koki MKT Oil Signal IndicatorIndonesia Industrial Parts

Description

Maeda Koki MKT, Since this product is using the tube of taper form for a transparent tube, it can beused also as a flow rate viewing type of a short form by seeing the related position ofa ball and the indicating red line.

Since the spring is being used for this product in a transparent tube, the postures when attaching are freedom, such as facing up, facing down, and side ways.The heat resistant is 80 ?.Standard pressure resistance : 1MPa

It shows flow quantity by viewing Because I use a transparent taper pipe, I can confirm approximate flow quantity by looking at a ball (or a float) and the position with the indication red line concerned.
The installation direction does not matter Because I use a spring inside, the posture when I attach it looks up and looks down and can perform sideways-facing freely.

Model		Dimensions (mm)			Maximum flow quantity (L/min)
Model		Connection diameter	Full length	Overall width	Maximum flow quantity (L/min)
Right? ji Include See Form	MKT25-1TL	Rc1/8	78	25	5
	MKT25-2TL	Rc1/4	78	25	5
	MKT25-3TL	Rc3/8	84	25	5
	MKT30-2TL	Rc1/4	104	30	10
	MKT30-3TL	Rc3/8	104	30	10
	MKT30-4TL	Rc1/2	110	30	10

Model		Dimensions (mm)			Maximum flow quantity (L/min)
Model		Connection diameter	Full length	Overall width	Maximum flow quantity (L/min)
Copper Pipe Business	MKT25-4	? 4	96	25	1.5
	MKT25-6	? 6	98	25	3
	MKT25-8	? 8	100	25	5
	MKT25-10	? 10	105	25	5

In the case of an order, an estimate ?Please appoint the inside of this.

Model
MKT ?*-?TL

Kind of the oil?
(or viscosity ?cSt of the oil)

Common use flow quantity
?L/min

An example:

Kind ISOVG32 common use flow quantity 3L/min of the MKT25-2TL oil
?Supplement about the model

The model in case of the R screw is MKT a connection entrance exit ?* -?It becomes TOL. An example: MKT25-3TOL
The model in case of the R screw is MKT a connection entrance ?* -?It becomes TOML. An example: MKT25-3TOML
The model in case of the R screw is MKT a connection exit ?* -?It becomes TMOL. An example: MKT25-3TMOL

Maeda Koki MKT Standard specifications (protest a form)

Fluid		Oil
Connection		Rc internal thread	Change to R screw
Connection		Rc internal thread	The combination with the R screw is possible, too.
Heat-resistant temperature		A maximum of 80 degrees Celsius	–
Withstand pressure		1MPa	–
Materials	Transparent taper pipe	Acrylic	–
	Coupling	C3604 (brass)	I can produce the product made in SUS, too.
	Spring	SUS304	–
	Nylon ball	Nylon 66	I may use a cylindrical float.

Maeda Koki MKT Standard specifications (for the copper pipe)

Fluid		Oil
Connection		The reference mentioned above	–
Heat-resistant temperature		A maximum of 80 degrees Celsius	–
Withstand pressure		1MPa	–
Materials	Transparent taper pipe	Acrylic	–
	Coupling	C3604 (brass)	–
	Cap nut	C3604 (brass)	–
	Zipper sleeve	Cu	–
	Spring	SUS304	–
	Nylon ball	Nylon 66	I may use a cylindrical float.