SiteLab SL1188 Clamp On Ultrasonic Flow Meter is a state-of-the-art universal transit-time flowmeter designed using SLSI technology and low voltage broadband pulse transmission.
General Information of SiteLab SL1188 Clamp On Ultrasonic Flow Meter
While principally designed for clean liquid applications, the instrument is tolerant of liquids with small amounts of air bubbles or suspended solids found in most industrial environments.
Clamp-on ultrasonic flow meter SiteLab SL1188 is a state-of-the-art universal transit-time Flow Meter for Heavy Industrial applications. Sophisticated electronics incorporating, the latest developments in a digital signal processor coupled. With powerful ultrasonic transducers deliver highly accurate flow measurement for liquids in full pipes.
Clamp-on Ultrasonic Flow Meter
Principally, an instrument designed for clean liquid applications. The instrument is tolerant of liquids with little air bubbles or suspended solids common in most industrial applications. Clamp-on ultrasonic flow meter SL1188 offers low power consumption, high reliability, and outstanding applicability at an economical price. An easy to read display and clear, user-friendly menu selections make using the instrument simple and convenient.
The instrument can be configured via keypad without any additional programming devices, is packaged in a die-cast IP65 housing, and is available in your choice of non-invasive clamp-on or insertion transducer configurations. The SL1188 ultrasonic flow meters feature a self-contained 4-20 mA current loop signal output for instantaneous flow. And there are has two independent temperature inputs for thermal energy monitoring.
Sitelab sl1168 clamp on ultrasonic flow meter
The instrument features:
7 digit alphanumeric display,
Parallel operation of positive,
negative and net flow totalizers (with user-selectable scale factors)
configurable pulse and frequency outputs (transmitted via a relay and open collector) for totalized flow.
1G SD Card for data logging and the software to download stored data to your PC. installation
Features
Accuracy +/-0.5% of Reading
Wide operating temperature range -40C to 150 C
One meter for a wide range of pipe sizes 25mm-5000mm
Clamp-on sensors are simple to install, leading to lower installation and labor costs
Clamp-on sensors mean no pipe cutting or process interruption and no plant shut-down
Wetted Sensors were available for acoustically dead pipes.
Hygienic measurement, no risk of contamination, suitable for ultra-clean liquids
Wide bi-directional Flow range of 0 to 12Metres/Second
Daily, monthly and yearly totalized flow
The internally configured batch controller makes batch control convenient
Measurement is independent of fluid conductivity or nonconductivity
1G SD card high memory data logging, maximum memorize 512 days data.
Simple Menu has driven setup with a wide range of common pipe materials, liners, and fluids selectable.
Temperature inputs for energy measurement.
Specifications
Flow Range : 0 to ±12 m/s
Accuracy : ± 0.5 % of reading
Repeatability : ±0.3% of reading
Pipe Size : 25mm to 5000mm
Outputs :
Analog : 0/4 to 20mA (max load 75?)
Pulse output : 0 to 9999Hz, OCT, (min. and max. frequency is adjustable)
Relay output : SPST, max 1Hz, (IA@125VAC or 2A @ 30VDC)
Communications : RS232, RS485 Mod bus
Power Supply : 90 to 245 VAC, 48 to 63Hz. Or 10 to 36 VDC (both are standard)
If going to place a SL1188 ultrasonic flow meter in an explosive atmosphere (hazardous area), the ultrasonic flow meter’s explosion-proof enclosure should be installed in a positively vented area.
The user must install the ultrasonic flow meters wiring in a safe area. Use explosion-proof threaded conduit unions between the wired conduits, conduits and junction boxes. Please use Ex-proof flexible cable conduits, if you need a flexible connection.
It is very important. The profile of fluid flow must fully, be developed to guarantee a highly accurate measurement. Use the guidelines to select a proper installation site:
The pipe installed transducer must full fill liquid. Examples, such as a vertical pipe with flow in an upward direction or a full horizontal pipe.
Ensure enough straight pipe length for the installation of the upstream and downstream transducer.
Sitelab Ultrasonic flow meter clamp on
Clamp-on Transducers Installation Methods
Clamp-on Ultrasonic Flowmeters are installed simply by applying the coupling compound on the bottom of the transducers and strapping them to the outside of the pipe. SiteLab Clamp-on Ultrasonic Flowmeters is internationally known for its simple and convenient installation and low maintenance characteristics.
V method installation on pipe size: 1” to16”(25mmto 400mm)
You must be logged in to post a comment.