J. Schneider C-TEC 2440-4 P

J. Schneider C-TEC 2440-4 P

J. Schneider C-TEC 2440-4 P, Capacitor buffered Power Supply. The DC UPS of the C-TEC 2440 P series is equipped with integrated ultracapacitors for accumulating energy. During normal operation this capacitor is charged by an internal charger which is supplied by an external, regulated DC power supply. If the DC supply is interrupted, energy of the ultracapacitors is released in a unregulated process (24,5 to 19 V DC). The load is supplied by the buffermodul until the voltage is ≤ 19 V. The buffering time depends on the state of charge of the capacitor and discharging current. As further function the C-TEC 2440 P can provide more current for a certain time.

 

The DC-UPS shows the following features:

  • Maintenance-free due to durable ultra capacitors
  • reduces wiring time due to intergrated energy storage
  • Microcontroller based charging and discharging of the ultracapacitors
  • Input voltage-signal via potential-free contact and LED
  • Short overload possible
  • Vibration secured wiring via spring loaded plugs
  • Wide working temperature range -40°C till 60°C

Another Article:

J. Schneider C-TEC 2440-4 P Technical Data

Nominal input voltage 24 V DC ± 10 %
Min. nominal input voltage for charging mode 23 V
Max. nominal input current 40 A
Max. charging current 6,8 A
Nominal output voltage (mains operation) 24 V DC ± 10 %
Nominal output voltage (buffer operation) 19 … 25,5 V
Max. nominal output current 40 A DC
Efficiency >90 %
Parallel connection No
Series connection No
Energy content 4 kJ
Buffer time 3,6 sec @ 40 A
Degree of protection IP20
Operating temperature -40 … 60 °C
Storage temperature -40 … 70 °C
Relative humidity 95 % non-condensing
Max. altitude (without derating) 2000 m above sealevel
Dimensions (H x W x D) 193 mm x 84 mm x 198mm
Weight 3,4 kg
Fixation Snap-on mounting for DIN top hat rail
Norms and Regulations EN 50178

EN 60950

UL approvals UL 508

C22.2

Reference : j-schneider.de

Download : Datasheet

Share