J. Schneider C-TEC 4815 P

J. Schneider C-TEC 4815 P, Capacitor buffered Power Supply. The DC UPS of the C-TEC 4815 P series is equipped with integrated ultracapacitors for accumulating energy. During normal operation this capacitor is charged by an internal charger which is supplied by an external, regulated DC power supply.

If the DC supply is interrupted, energy of the ultracapacitors is released in a unregulated process (49 to 38 V DC). The load is supplied by the buffermodul until the voltage is ≤ 38 V. The buffering time depends on the state of charge of the capacitor and discharging current. As further function the C-TEC 4815 P can provide more current for a certain time.

The DC-UPS shows the following features:

Maintenance-free due to durable ultra capacitors
reduces wiring time due to intergrated energy storage
Microcontroller based charging and discharging of the ultracapacitors
Input voltage-signal via potential-free contact and LED
Short overload possible
Vibration secured wiring via spring loaded plugs
Wide working temperature range -40°C till 60°C

J. Schneider C-TEC 4815 P Technical Data

Nominal input voltage	48 V DC ±10 %
Min. nominal input voltage for charging mode	44 V DC
Max. nominal input current	18 A DC
Max. charging current	3 A DC
Nominal output voltage (mains operation)	48 V DC ±10 %
Nominal output voltage (buffer operation)	49 V … 38 V DC ± 2 %
Max. nominal output current	15 A DC
Efficiency	>90 %
Parallel connection	No
Series connection	No
Energy content	1,2 kJ
Buffer time	25 sec @ 1 A / 0,6 sec @ 15 A
Degree of protection	IP20
Operating temperature	-40 … 60 °C
Storage temperature	-40 … 60 °C
Relative humidity	95 % non-condensing
Max. altitude (without derating)	2000 m above sealevel
Dimensions (H x W x D)	123 mm x 65 mm x 145 mm
Weight	0,8 kg
Fixation	Snap-on mounting for DIN top hat rail or mounting bracket for mounting plate
Norms and Regulations	EN 50178 / EN 60950 EN 61000-6-4 EN 61000-6-2 EN 60068-2-6 EN 600068-2-27
UL approvals	No