West Controls has the solution whether your need is as simple as a single program with individual ramp and dwell segments or more advanced with multiple recipes that involve several segments, loops, and events. Profiler temperature controllers serve functions such as automating manufacturing processes for increased productivity, minimizing staff oversight, and ensuring consistent quality in applications ranging from metal and composite heat treatment processes to food and beverage production.
Profiler temperature controllers are necessary when temperature and other process applications require the setpoint to change over time.
West Control Solutions KS 90-1 Single Loop Process Controller
Profiler temperature controllers are mostly panel-mounted devices available in several sizes and levels of sophistication. From a basic numeric to a clean and crisp graphical display, these devices are designed for you to see the status of the process and any alerts or alarms at a glance. Additional features available through this product line include two control loops as well as an in-built datalogger to record your process data.
Please use the selection chart below to choose your profiler temperature controller. However, if you need help specifying a profiler, please submit an inquiry and a member of our technical sales team will contact you shortly to discuss your requirements.
Description KS 90-1 Single Loop Process Controller
The KS 90-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.
The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.
The optional 3rd input is a universal input that can be used for several functions, e.g. temperature temperature-dependent setpoint correction or differential control. The standard KS 90-1 is suitable for oxygen control using heated and unheated O2 sensors.
The KS 90-1 is particularly suited to the following applications:
- Furnaces and ovens
- Burners and boilers
- Plastics processing
- Driers
Benefits & Features KS 90-1 Single Loop Process Controller
- BluePort®
- Front interface and BlueControl software
- Maintenance manager and error list
- Two universal inputs
- Day & Night display shows plain text and bargraphs
- Manual gain scheduling
- Self-Tuning to the setpoint without oscillation
- Valve controller with position feedback and DAC monitoring
- 3-point controller for water, fan and oil cooling
- Type tested to EN 14597 (replaces DIN 3440) and cULus
- High-impedance mV input for O2 sensors
- Two switchable parameter sets
Specification KS 90-1 Single Loop Process Controller
| Product Category: | Single Loop controller |
| Dimensions and size: | 96m x 48mm x 118mm (HxWxD), 1/8 DIN |
| Connectors: | Pin or screw terminals |
| Primary Input Type: | Universal (TC, RTD, DC linear mA/mV) |
| Other Inputs: | External setpoint, Ratio input, Potentiometer input, Heating current monitoring |
| Output Type: | Relay, Logic, Linear mA/VDC, Optocoupler |
| Max. Number of Outputs: | 6 |
| Scan Time: | 100 ms |
| Number of Programmer Segments: | 16 Program x 16 Segments |
| Control Type: | 2-point (on/off), continuous PID control, or 3-point stepping |
| Power Supply: | 90-260 VAC, 20,4-26,4 VAC: Frequency 48-62 Hz, 18-31 V DC |
| Communications: | RS422 & RS485 Modbus, Profibus-DP |
| Panel Sealing: | IP65 |
| Certifications: | CE, cULus, DIN EN 14597 |
| Software Tools: | Blue Control |
Source : www.west-cs.co.uk
Read More Articles :
- Microsensorcorp Earth1006 Remote Monitoring Terminal
- Dwyer 550 Series Sight Window
- BAMOSOFT Control Bamo Water Hardness Monitor
- BAMOPHAR 364 Bamo Conductivity Meter
- BAMOPHAR 323 Bamo Conductivity / Resistivity