Description
APG Radar Level Transmitter PRX True Echo Explosion Proof Pulse With a low dielectric requirement for target materials and radar’s reliable accuracy in environments with foam or vapors, the easy-to-install True Echo™ PRX makes getting dependable level readings in hazardous places simple.
Dependable level readings in hazardous areas. True Echo™ PRX makes getting dependable level readings in Class I, Division 1, and Class II/III, Division 1 hazardous locations simple. The True EchoTM PRX Explosion-Proof Pulse Radar Level Transmitter brings the unassailable level readings of radar sensors to Class I, II, and III hazardous locations.
The True EchoTM PRX automatically adjusts signal power for optimal accuracy and clarity, with echo masking and damping factors programmable via software. With a low dielectric requirement for target materials, and radar’s reliable accuracy in environments with foam, vapors, and dust, the easy to install True EchoTM PRX makes getting dependable level readings in hazardous areas simple.
APG Radar Level Transmitter Features
- Ranges to 17, 50, or 100 feet
- ±0.25% of measured range accuracy
- 6.1 ?A output resolution
- Field configurable 4-20 mA/20-4 mA Output
- RS-232, RS-485, or HART communications
- PC calibration, diagnostic and data logging software
- PLC compatible (Modbus RTU)
- Nema 6 / IP68 enclosure rating
- FM Approval: Class I, Div 1; Class II/III, Div 1 ratings
- Simple installation and setup
- Automatic adjustments for most tank conditions
- Very low material dielectric constant requirement
- Optional Fast Firmware for quickly changing levels
Explosion Proof
The True Echo™ PRX Explosion-Proof Pulse Radar Level Transmitter brings the unassailable level readings of radar sensors to Class I, Division 1, and Class II/III, Division 1 hazardous locations.
Easy Wiring & Set-up
From a 2- or 3-wire 4-20 mA output to pushbutton field calibration, everything about the True Echo™ PRX is easy.
Self Adjusting
True Echo™ PRX automatically adjusts signal power for optimal accuracy and output clarity.
Specification
| Performance | |
| Available Ranges | PRX-017: 1 to 17 ft. |
| PRX-050: 1 to 50 ft. | |
| PRX-100: 1 to 100 ft. | |
| Frequency | 6.3 GHz |
| Accuracy | ±0.25% of maximum range |
| Resolution | 6.1 ?A (approx. 2622 digital counts across range) |
| Material Dielectric | Er > 2 |
| Physical | |
| Housing | Aluminum |
| 316 Stainless Steel | |
| Mounting | 1.5, 2, or 3 in. NPT |
| 13 in. Ø 316L SS Bottom Flange | |
| Antenna | Teflon Rod |
| 316L Stainless Steel 6” Ø Horn | |
Download Data Sheet: True Echo Explosion Proof Pulse Radar Level Transmitter PRX
Ref: apgsensors.com
Another Article:
- Hengesbach Level Module for Installation in Level Probes Tyoe NM
- Takuwa Water Level Gauge Sensor
- Mac3 Float Level Switch
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor