Bamo ES 5000 Relay for Resistive Level DetectionIndonesia Industrial Parts

Bamo ES 5000 Relay for Resistive Level Detection works with the electrical conductivity property of the liquid, detecting the opening or closing circuit between two electrodes.

Bamo ES 5000 Features

For all electrical conductive liquids
Suitable for level or leakage detection
Adjustable sensitivity and timer, Selection of action mode
Self diagnostic with instant alarm (LED) for: Short circuit on the loop detection, Loop detection cable break off
Functions:
- On /Off level controller between 2 rods
- Level regulation between 3 rods
- Leakage, inundation and humidity detection

Application

Relay for level control

Minimal or maximal levels – Dosing, flow detection and alarm, pump control, solenoid valve control, fluid detection in a pipe.

Relay for leakage, inundation and humidity detection

In use with a LISA sensor, the relay ES5000 is dedicated for leakage detection on water distribution (pipes, sprinklers) and alarming in case of water, condensates or humidity in areas where water is prejudicial for equipment. The relay ES5000 includes a self diagnostic of the detection loop (short circuit on the loop detection and ribbon sensor break off) in order to warranty a positive safe detection system

Bamo ES 5000 Specification

Power supply input:	230, 115, 48, 24 V AC – 50/60 Hz
Power supply input:	12, 24 V DC
Consumption:	<2VA
Ambient temperature:	-15 to +45°C
Mass:	100 g
Mounting:	DIN rail (DIN 46277)
Dimensions:	22.5 x 75 x 99 mm
Protection:	IP40 – Tropicalized on request (varnish)
Hysteresis:	About 10% of sensitivity
Adjustable timer:	0.5 … 3 s (increase and decreasing signal)
Sensitivity:	Low range = 5 to 70 kOhm
Sensitivity:	High range = 15 to 150 kOhm
Current loop output:	Galvanic insulated, < 6 V ac / < 2 mA
Relay outputs (2):	Max 250 V, 3 A [AC]
Relay outputs (2):	Max 125 V, 1 A [DC]
CE Labels:	In accordance with low voltage guidelines
CE Labels:	(2006/95/EEC) and (89/336/CEE)