Bamo WM25 Level Floor Leak Detector are used for monitoring water leaks in rooms and retention basins. The sensor detects non-aggressive and electrically conductive liquids such as water. Installed on the floor, WM25 triggers the alarm as soon as the liquid reaches the electrodes. The adjustment screws allow to adjust the detection height.
Bamo WM25 Features
- Easy installation
- Robust and economical
- Built-in relay 60 V / 0.5A
- Power supply 24 V DC
- Adjustable height of detection
Application
Leak detection of water in
- Retention basin
- Sub-floor
- Double ceiling
- Under cooling piping
- Etc.
Specification
| Power supply | 24 V DC (18 … 30 V DC) |
| Consumption | Max. 20 mA |
| Conductivity | About 0.8 to 1 M?.cm (1 to 1.25 µS/cm) |
| Loop current | About 1 mA |
| Relay | Change-over contact (60 VA; Max. 0.5 A) |
| Reset-function | With the magnet fixed on the cable (red part) |
| Cable | PVC; 5m long; 5 x 0.14 mm² |
| Ambient temperature | -20 … +60 °C |
| Dimensions | 50 x 35 x 25 mm (LxWxh) |
| Detection height | Adjustable 2 … 5 mm with screws (0 mm without) |
| Protection | IP 67 (not suitable for permanent immersion) |
| Mass | 210 g including the cable |
Download Data Sheet: Level Floor Leak Detector WM25
Ref: bamo.eu
Another Article:
- Hengesbach Level Module for Installation in Level Probes Tyoe NM
- Takuwa Water Level Gauge Sensor
- Mac3 Float Level Switch
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor
