Hengesbach Depth-Measuring Sensor Type TPS-T

Hengesbach Depth-Measuring Sensor Type TPS-T

Depth-Measuring Sensor Type TPS-T
Depth-Measuring Sensor Type TPS-T

Hengesbach is a company from Deutschland. For more than 50 years Hengesbach develops, manufactures and distributes innovative measuring technology for applications in production processes where functionality, reliability and accuracy of the instruments are of highest priority even under extreme process conditions.

Depth-Measuring Sensor Type TPS-T

Typical applications of the piezo-resistive depth-measuring sensor of the type TPS-T are the continuous measuring of filling levels in wells, drill-holes, waste-water systems, standing water bodies and containers that cannot be fitted with a measuring transducer that is flush with the wall of the container. The 4-20mA output signal is proportional to the filling level or pressure and is also available with a 4-wire temperature output.


  • for hydro static filling level and depth measurements in wells, drill-holes, containers, waste-water systems, etc.
  • pressure ranges from 0 … 0.25 bar to 0 … 25 bar
  • output signal 4…20 mA
  • compact and robust construction
  • optionally with temperature output

Another Article:


Device type / measuring principle depth-measuring sensor of the type TPS-T / piezo-resistive
Applications hydrostatic filling and level measurements in liquids


Measuring ranges see order information
Overload limit 3 times the maximum measuring value; max. 40 bar overload safety
Bursting pressure > 4 times the maximum measuring value; max. 50 bar


Output signal 4…20 mA, 2-wire
Working resistance < (UB-10V)/0.02A (Ω)
Influence of working resistance < 0.1% of filling level

Measuring accuracy

Linearity < 0.5% of filling level
Setting time < 10ms
Thermal hysteresis Zero point and measuring range of 0…50°C

Auxiliary energy

Power supply 10…30V DC ripple: the voltage peaks may not exceed or fall short of the values given for the
power supply
Influence of power supply < 0.01%/V of maximum value (nominal power supply 24V DC)

Conditions for use

Permissible operating temperature 0…50°C
Environmental temperature influence at 0…50°C zero point: < 0.02%/1K typically < 0.04%/1K max.
measuring range: < 0.02%/1K typically, < 0.04%/1K max.
zero point: < 0.04%/1K typically, < 0.06%/1K max. for measuring range 250/400 mbar
measuring range: < 0.03%/1K typically, < 0.05%/1K max. for a measuring range of 250/400

Design configuration

Electrical connection 6-wire sheathed polyethylene cable with internal air equalisation hose, length as required,
minimum bending radius 120 mm (fixed installation), for use up to 100m without an additional
cable grip
Parts in contact with the medium stainless steel material No.: 1.4435 (316L)
FPM, polyolefin, polyethylene
Protection type EN 60529 IP68 (up to 40 bar)


pressure equalisation casing with ventilation filter *
cable reel *

Download Data Sheet: Depth-Measuring Sensor Type TPS-T

Ref: Hengesbach.com