Bamo MAXIMAT CX Level Compact Overfill Detector

Bamo MAXIMAT CX compact overfill detectors are level limit switches that are used to prevent overfilling of containers with water-polluting liquids. When an electrically conductive liquid comes into contact with the detector stem, the integrated electronics respond by interrupting the continuous output signal. This signal can be read out from the system controller as acoustic and optical alarm and, if required, can be used to cause an emergency shutdown of the filling process.

Bamo MAXIMAT CX Features

  • All-plastic versions
  • Integrated transmitter and connection for test button
  • No moving parts
  • For storage tanks
  • NPN / PNP interface

Application

Overfill detector in accordance with the German Water Resources Act (WHG) for containers used for storing, filling and handling water-polluting, electrically conductive, non-flammable liquids.

Bamo MAXIMAT CX Specification

DetectionCapacitive high-frequency sensor, fail-safe detector
Ambient temperature-20 … +60 °C
Operating pressureAtmospheric; Limits: 0.8 to 1.1 bar
Housing headPBT, fiber-glass reinforced
ProtectionIP65 according to EN 60 529
FittingsSee the table ”ordering information”
Power supply15 … 27 V DC
Consumption< 1 W
OutputsPotential-free Reed contact for low voltage (Normally Closed, it opens when alarm occurs)
Rated: Max. 50 V AC / DC, Max. 0.5 A, Max. 10 VA, convenient for operating with a coupling relay or PLC, signaling device TC4 / TC1 or CST unit.
2-wire alarm output reporting with transmitter MAXIMAT SHR C
TerminalsScrew terminals, cable max. 2.5 mm²
Additional functionConnection of an external test button (potential-free
contact), for a complete diagnostic of the device integrity
(connection loops, electronics).
Connection optionsAlarm units: MAXIMAT TC1 / TC4
Coupling relay: CST
Transmitter: MAXIMAT SHR C
Automation with PLC

Download Data Sheet: Level Compact Overfill Detector MAXIMAT CX

Ref: bamo.eu

Another Article:

Similar Posts