Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.
Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.
Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.
Level Leakage Detection Sensor MAXIMAT LW VK
The sensor MAXIMAT LW VK is designed to detect conductive liquids non-electrically conductive. The detection results from the position of a magnet inside the float and a Reed contact inside the probe. It is necessary to use it with a SHR C transducer. The liquids may not generate deposit originating jamming of float.
- Float level fail-safe detection
- For aggressive and non electrically conductive liquids
- Positive active alarm
- Auto diagnostic system and LED indication when in use with a SHR C transducer
- Approvals: DIBT Z-65.40-272, for leakage detection, WHG§19 when in use with a SHR C transducer
The MAXIMAT is ideal for permanently survey risks of leakage of a liquid from a storage tanks, filling equipment, dosing pumps etc. Convenient to use with non-electrically conductive liquids, oils, emulsified, non-flammable, water endangering liquids. It is a perfect instrument to detect fluid in a double wall tank. MAXIMAT LW VK operates with liquids of specific weight from 0.7 g/cm3
|Main power supply:||24 V DC ± 10 %; caution: DC current circuit should be protected by a fuse of 250 mA.|
|Power consumption:||approx. 3 W|
|Ambient temperature:||-20 to +60° C|
|Operating pressure:||atmospheric, 0.8 to 1.1 bar|
|cable:||TPK, 2 x 0.5 mm2, shielded|
|Hysteresis:||about 2 mm|
|Terminal housing:||PBT, fibre glass reinforced, IP 65 acc. EN 60 529|
|Terminals:||screw connectors, IP 20; max. wire cross-section 2.5 mm2|
|Output:||to a transducer MAXIMAT SHR C|
|Cable length 300 m maximum, wire cross section 0.5 mm2 as a minimum|
|CE mark:||in accordance with low-voltage directive (73/23/CEE) and EMC directives (89/336/CEE) and standards EN 50 082-2: 1995, EN 55 011 (class A): 1998|
|Approvals:||DIBT Z-65.40-272, for leakage detection|
Download Data Sheet: Level Leakage Detection Sensor MAXIMAT LW VK