Description
Bamo EasyTREK Ultrasonic Level Transmitter is a high performance ultrasonic transmitter with integrated electronics into the housing. Positioned above the surface of the liquid to measure, the transmitter provides a signal proportional to the liquid level.
The sensor is set up via the HART protocol. For multiple tank applications, EasyTREK may be operated via ancillary control systems compatible with this protocol HART 7 (examples: multichannel MultiCONT or PC or PLC). The MULTICONT can manage up to 15 transmitters EasyTREK. Data transmission is then possible through the RS485 interface of display unit.
Bamo EasyTREK Setting Features with HART Modem:
- Range scaling (4-20 mA and default error current)
- Measurement settings (Unit, function, echo(es)
- Measuring sequence optimization (delay, speed …)
- Choice between 14 shapes of tanks and containers
- Choice between 21 types of open channels
- Linearization through 32 points
- Information and diagnostics on signal status
Features
- Height range 0.15 to 18 m, for liquids
- Non-contact level measurement
- HART® 7 protocol
- Output signal 4-20 mA
- IP 68 (allows accidental immersion)
Application
The EasyTREK allows continuous measurement of a liquid level (storage tanks, Venturi channels, weirs, sewage pumping stations, storm receivers, etc.).
Bamo EasyTREK Ultrasonic Level Specification
| Housing | PP or PVDF (Option: PP/PTFE) |
| Liquid temperature | -30 … +90 °C |
| Ambient temperature | -30 … +80 °C |
| Pressure | -0.5 … 2 barg |
| Protection | IP 68 |
| Accuracy | ± (0.1 % of measurement + 0.025 % of range scale) |
| Within optimal operating conditions and stabilized | |
| temperature of the transmitter. | |
| Resolution | According the measured height: |
| < 2 m: 1 mm; 2…5 m: 2 mm; 5…10 m: 5 mm; >10 m: 10 mm | |
| Full beam angle | 5° to 7° according the model |
| Power supply | 11 … 36 V DC |
| Output signal | Analogue 4-20 mA |
| Relay (option) | 1 contact, change-over; 30 V DC, 1 A DC |
| Set up | Through protocol HART® 7 |
| Electrical protection | Classe III |
| Output cable | Type LiYCY, Ø 6 mm, shielded, 2 x 0,5 mm² |
| Standard: 5 m long (on request up to 30 m) | |
| ATEX version | On request |
Download Data Sheet: Ultrasonic Level Transmitter EasyTREK
Ref: bamo.eu
Other Article:
- Hengesbach Level Module for Installation in Level Probes Tyoe NM
- Takuwa Water Level Gauge Sensor
- Mac3 Float Level Switch
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor