Bamo Turbidity, Temperature and Oxygen SensorIndonesia Industrial Parts

Overview

Bamo Measures Sas was founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone rapid development centering on industrial pH meters and conductivity meters. Bamo is now well-known as a leader in the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

All electrical devices are subjected to strict, individual testing. Adherence to documented inspection procedures assures flawless functioning of all subassemblies and components during production, as well as after final assembly. Additional testing before shipment provides you, as well as ourselves, with an added measure of assurance that our products meet the most demanding quality requirements.

All of the necessary technologies are at our disposal – in-house. This guarantees us the flexibility we need to produce custom devices for you in the shortest time. Well-trained employees, as well as documented procedures and work directives that have been implemented within the framework of the DIN EN ISO 9001:2000 standard, assure that the product quality you expect is continuously maintained and documented.

Bamo is a company that comes from France. This company sells some products. The products of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; and Metal valves.

Bamo Turbidity Meter Products

Turbidity Controller TURBISWITCH GS4

The TURBISWITCH GS5 with one of its associated probes or cells, operates turbidity measurements for evaluation of the solid content of a liquid.

The turbidity signal is read out as a limit value (adjustable ) via the controller GS5. Turbidity measurement is based on the principle of optical attenuation of transmitted light, i.e. depends directly on the amount of undissolved solids in the liquid.

Pulse infrared light makes the measurement not affected by ambient light. If the measured turbidity value exceeds or below the trigger point value, the output relay in the TURBISWITCH GS5 is actuated following the settings.

: Bamo Turbidity Sensor and Transmitter

Turbidity Measuring Cells TURBISWITCH GA 1 / GA 5 / GA 11

TURBISWITCH GA armatures are supplied with an emitter and a receiver, dedicated to turbidity detection. Emitters and receivers must be mounted on the specific armatures, to have a good beam alignment. With the help of its adjustable threshold, the TURBISWITCH GS4 controller gives you a warranty of good detection quality.

Armatures for turbidity control TURBISWITCH GA armatures can be mounted in-line as in by-pass with diameters from DN15 up to DN100.

Immersion Probe TURBISWITCH CP2

A complete system includes a CP2 probe connected to a TURBISWITCH GS4 controller. It provides a contact as soon as the turbidity reaches the preset value. The emitter sends the infrared light beam through the liquid to the receiver.

The signal variations due to the turbidity changes are analyzed by the TURBISWITCH GS4 to detect an override threshold and then to actuate the relay output. To avoid false alarms due to air bubbles or accidental excess of turbidity, delays are adjustable between 0.1 and 9.9 s on both increasing and decreasing turbidity.

Portable Sludge Level Measuring Instrument MUDLine® TGS

Portable sludge level measuring instrument. A turbidity sensor (emitter plus receiver) is mounted on an immersion probe with an integrated hydrostatic level sensor. The light beam is in the Infrared range at 940 nm.

When the immersion probe reaches the sludge surface, the device switches on an audible alarm and a lightning alarm. At the same time, the depth of immersion is displayed on the main housing.

Underwater Settled Solids Detector MUDSonic

Bamo Turbidity Underwater Settled includes a MUDSonic TS immersion probe and a MUDSONIC MF operating unit. The detection is done between the emitter and receiver of ultrasonic waves. The probe evaluates the concentration of solid particles by attenuation of the signal. The probe is immersed at a fixed height in the tank; It triggers a switch when the concentration (predefined) is reached (sludge level rising by settlement). The trigger point and timer are adjustable on-site (real operating conditions).

Turbidity Monitor BAMOPHAR 436

BAMOPHAR 436 is equipped with a color touch screen to set up the configuration and to display the turbidity, temperature, and state of thresholds. Copies of measurement are available on 2 outputs 4-20 mA.

TURBICUBE in PVC or PPH and TRUBOMAT GAB in stainless steel, are dedicated to in-line measurement (see data-sheet 444-01 & 446-01)
TURBISENS in PVC is an immersion probe with a transmitter for measurements in tanks, basins, and channels (See data sheet 443-01).

Turbidity monitor BAMOPHOX 436

The BAMOPHOX 436 offers high flexibility in use mixing different built-in programs for regulation, thresholds, temperature compensation, and alarms. The 2 lines back-lighted display, 16 alphanumerical characters, gives an easy measurement and temperature reading in any condition.

It also displays the configuration menu and settings of thresholds, analogical outputs, and operation data modes. To allow a quick and easy diagnostic after configuration a simulation program is built-in with direct actuation on contacts outputs, and analogical outputs. A copy of the signal on the 4-20mA output is galvanic insulated; it can be set up within all scales of the parameter. Temperature measurement is also available on a 4-20 mA.

Turbidity Transmitter, Immersion Probe TURBISENS

Compact transmitter 4-20 mA
Measurement according to ISO 7027, infrared light source 860 nm
Selectable Ranges in FNU 0…50 /…100 /…200 /…500 /…1000 /…2000
High resolution from 0.01 FNU
Integrated 4 digits display for actual value, programming, settings
Anti-fouling coating of optical windows
Integrated automatic external light compensation
Integrated color/dirt compensation (switchable)
Control calibration kit
Turbidity control of wastewater, settlement process. Monitoring of wells, and tanks.

In-Line Turbidity In Transmitter TURBICUBE

The flow-through cell allows the turbidity measurement directly on the line, without a sampling system. Its built-in transmitter is convenient for transmitting the signal to installed DCS PLC or BAMOPHOX TUR. The 4-20 corresponds to the DIP Switch selectable range:

TURBICUBE 20: from 0.01 to 20 FNU in 5 selectable ranges TURBICUBE 1000: from 0.1 to 1000 FNU / FAU in 5 selectable ranges

Stainless Steel In-Line Turbidity Transmitter TRUBOMAT GAB

The TRUBOMAT measures the turbidity of liquids using the light absorption and scattered light measuring method. The inline measuring cell includes two IR emitters and one IR receiver in pulsating light mode (IR measuring method according to ISO 7027). When interconnected, the BAMOPHOX TUR, measuring amplifier, analyses the 4 to 20 mA signal generated by the TRUBOMAT.

TRUBOMAT 20: from 0.01 to 20 FNU in 5 selectable ranges
TRUBOMAT 1000: from 0.1 to 1000 FNU / FAU in 5 selectable ranges

Handheld Turbidity-Meter BAMOPORT MI 415

BAMOPORT MI 415 Bamo Handheld Turbidity-Meter is a measurement of how much is turbid a sample. In rivers, it is usually caused by suspended particles or colloidal particles that absorb, scatter, or reflect light. In eutrophic waters (with nutrients in excess), it may result in the presence of bacteria and microalgae. By measuring the turbidity (photometric or comparative methods), it is possible to estimate the content of suspended particles and materials. The BAMOPORT MI 415 is used to accurately measure turbidity in the field or in the laboratory.

Temperature

Input for Pt 100 Ohm Sensors 4-20 mA Transmitter APAQ-HRF

Bamo APAQ-HRF Input for Pt 100 Ohm Sensors product that comes from temperature categories. And there is an input from this product such as Pt 100 Ohm and Resistor. And there is an output in this product such as 4-20 mA. Input for Pt 100 Ohm Sensors 4-20 mA Transmitter APAQ-HRF can be used for industrial.

Programmable 2 Wires Transmitter T2FR 5333

Bamo T2FR 5333 Temperature Programmable 2 Wires Transmitter is a product from Bamo. This product comes from the categories of temperature. And this temperature linear measure with a resistance sensor, Pt 100, Pt 1000, Ni 100.

Temperature Probe with Pt 100 ? sensor TS 11

Bamo TS 11 Temperature Probe with Pt 100 ? Sensor is based on variation of resistance from metallic wires (resistors) against variations of temperature. Materials most often used are platinum and nickel. Platinum offers a large temperature range and good linearity. His pureness and chemical inertia guarantee the high stability of the sensor itself.

Plastic Temperature Probe, Pt 100 ? TS 13

The TS13 probe is entirely designed with plastic materials. Made for your application for aggressive environments, the TS13 probe reduces maintenance costs while maintaining the measurement quality of traditional metal probes

Bamo HygroWiz Relative Humidity and Temperature

Bamo HygroWiz Relative Humidity and Temperature measures the temperature and relative humidity of the air. The temperature and humidity probe is integrated or cable connected to the housing. Standard version: the probe has a PTFE tap filter to limit the impact of water splashes (non-absorbent and anti-corrosion surface).

Oxygen

Dissolved Oxygen Probe AQUAPLUS

AQUAPLUS sensor works on the principle of Dynamic Luminescence Quenching. This technology offers valuable advantages over any conventional electrochemical method. It results in a high-precision measurement with low maintenance costs. The sensor has a high sensitivity to low oxygen concentrations and it is not affected by contamination or poisoning by chemicals such as sulfite, sulfate, chlorine, and ammonia.

Dissolved Oxygen Monitor BAMOPHAR 451

BAMOPHAR 451 Bamo Dissolved Oxygen Monitor is extremely versatile by using various parameters for control and regulation of thresholds, temperature correction, and alarms.