Battery Powered Insertion Magnetic flow meters EX90Indonesia Industrial Parts

Description

The EX90-series battery-powered, insertion electromagnetic flow meter is designed for use with conductive fluids in 4”–12” pipe. The EX90’s stainless steel body allows the meter to operate in a wide range of temperatures, pressure, and corrosive or dirty environments.

The EX90 is highly suitable for difficult applications. With no moving parts, these meters can be used in “dirty water” applications where debris would foul a mechanical meter. If the EX90 meter is used with a programmable controller, the output signal can be fed direct, with no other conditioning required.

Rate and total units can be set via the front panel touch keypad by the user. Bidirectional flow is standard with totals available in forward, reverse, net, batch forward and batch reverse. The EX90 is battery powered and an output cable is available for transmitting the pulse signal to remote devices.

The EX90 includes a Seametrics saddle that has been designed to accommodate a wide range of pipe sizes and types while ensuring correct placement in the pipe. In addition, an optional internal data logger allows local storage of flow history.

Features

Direct replacement for propeller meters
Easy to install
Less pipe obstruction
No moving parts or bearings to replace
No routine maintenance
Pulse Output Standard
4-year battery life
Economical

APPLICATIONS

Municipal water
Water/Wastewater treatment
Reuse/Reclaim water
Industrial processes
Cooling towers
Pump towers
Dewatering

Specificaition

Pipe Size		4” to 12”
Materials	Sensor Body	316 SS
	Electrodes	Hastelloy
	Housing	Powder-coated diecast aluminum
	Electrode Cap	PVDF (Kynar®)
	O-Ring	EPDM
Temperature	Operating	10? to 140? F (-12? to 60? C)
	Storage	-40? to 158? F (-40? to 70? C)
	Fluid Temp.	32? to 200? F (0? to 93? C)
Pressure		200 psi (14 bar)
Flow Rate		0.5 – 4.5 m/sec (1.64 – 14.8 ft/sec) (Low flow cutoff .15 m/sec; .49 ft/sec)
Calibration Accuracy	0.5 – 4.5 m/s (1.64-14.76 ft/sec)	+/- 2% of reading
	0.3 – 0.5 m/sec (0.98 – 1.64 ft/sec)	+/- (2% of reading + 0.25% of full scale)
Display	Type	128×64 dot-matrix LCD
	Digits	5 Digit Rate		8 Digit Total
	Units Please Note: All meters are factory set for gallons per minute (GPM) rate and acre foot total. If other units are required, they can be set in the field.	Rate Volume Units	Rate Time Units	Total Volume Units
		Gallons Liters Barrels (42 gallons) Cubic Feet Cubic Meters Million Gallons1 Mega Liters1 Imperial Gallons Million Imperial Gallons1	Second Minute Hour Day	Gallons Gallons x 10 Gallons x 100 Gallons x 1000 Million Gallons Liters Kilo Liters Mega Liters Barrels (42 gallons) Cubic Meters	Cubic Meters x 1000 Cubic Feet Cubic Feet x 1000 Million Cubic Feet Imperial Gallons Imperial Gallons x 1000 Million Imperial Gallons Acre Inch Acre Foot Fluid Ounce
	Bidirectional	Forward Total, Reverse Total, Net Total, Batch Forward, Batch Reverse2
Power		One lithium 7.2V ‘D’ size battery pack, replaceable.
Scaled Pulse Output	Signal	Current sinking pulse, isolated, 36 Vdc at 10 mA max
	Pulse Rates	User-scalable from 0.1 to 99,999.9 volume units/pulse. Pulse width varies with output frequency, 150 pulses/sec max
Cable	Optional Output Cable	20ft (6m) standard length polyurethane jacketed cable—for power and outputs. (Lengths up to 200’ (60 m) available.)
Conductivity		>20 microSiemens/cm
Empty Pipe Detection		Hardware/software, conductivity-based
Regulatory		Certified to NSF/ANSI standard 61 and NSF 372 (Stainless only with EPDM O-ring. Viton pending).
Environmental		IP 67