APG MPI-T Titanium Stem Magnetostrictive Float Level TransmitterIndonesia Industrial Parts

Overview

APG MPI-T Titanium Stem Magnetostrictive Float Level Transmitter provides highly accurate and repeatable level readings in a wide variety of liquid level measurement applications. The MPI-R’s large, buoyant, and robust float allows for use in harsh applications where fouling or buildup might otherwise be of concern. The MPI-E’s lighter-weight design allows it to be used in applications where space is limited.

The MPI-E Chemical has a chemical-resistant coating, allowing for use in corrosive, acidic, or marine environments. The MPI-F’s flexible stainless steel stem allows for installation in tall tanks without needing a crane, and the MPI-T’s 1” titanium stem provides compatibility in a wider range of corrosive media–including H2S–in larger tanks.

Big time anti-corrosion and hazLoc ratings for big applications. With a 1″? titanium stem, Class I Div 1 and Class I Zone 0 approvals, and floats that just don’t get stuck, the MPI-T is built to conquer corrosive chemicals and hazardous locations. The MPI-T takes the fight to large-scale corrosive or acidic level-measurement conditions.

Description

The MPI Series Intrinsically Safe Magnetostrictive Level sensor provides highly accurate and repeatable level readings in a wide variety of liquid level measurement applications. The MPI-R’s large, buoyant, and robust float allows for use in harsh applications where fouling or buildup might otherwise be of concern. The MPI-E’s lighter-weight design allows it to be used in applications where space is limited.

The MPI-E Chemical has a chemical resistant coating, allowing for use in corrosive, acidic, or marine environments. The MPI-F’s flexible stainless steel stem allows for installation in tall tanks without needing a crane, and the MPI-T’s 1” titanium stem provides compatibility in a wider range of corrosive media–including H2S–in larger tanks.

APG MPI-T Titanium Stem Magnetostrictive Features

Class I, Division 1, and Class I, Zone 0 Hazardous Location Rating (cCSAus, ATEX, IECEx)
Highly accurate and repeatable readings
RS-485 (Modbus RTU) output
Rugged and reliable, lengths up to 25 feet (7.62 m)
Dual level (interface) measurement
Tank volume or level output, strapping table
Pairs with MDI display for self-contained, intrinsically safe, level measurement and display system

APG Float Level Transmitter Anti-corrosion

The MPI-T is made specifically for use with Hydrogen Sulfide (H₂S) and other corrosive liquids.

Modbus Output

The RS-485 Modbus RTU output makes any MPI compatible with any Modbus controller. It also pairs with the MDI controller to create a self-contained, Intrinsically Safe level monitoring solution.

Tank Cloud Compatible

The MPI liquid level sensor is a Tank Cloud slave sensor, able to communicate via the Internet with the addition of an LOE Master sensor or an RST-5003 module.

Application

C I, D 1 Hazardous Locations
C I, Z 0 Hazardous Locations
Chromic (H₂CrO₄), Boric (H₃BO₃), and Nitrating (S15% H₂SO₄) Acids
Water and Wastewater Treatment
Pulp and Paper
Biotech
Chemical

APG MPI-T Titanium Stem Magnetostrictive Specification

Performance
Accuracy	Greater of ±0.04 in. (±1mm) or 0.05% of full range
Resolution	Modbus: ±0.04 in. (±1mm)
Electrical
Supply Voltage	8-24 VDC
Typical Current Draw	Modbus (RS-485): 25 mA
Physical
Housing	Cast aluminum, epoxy coated
Stem	Titanium
Stem Length	4 – 25 ft. (1.22 – 7.62 m)
Float Materials	Titanium
Environmental
Operating Temperature	-40° to 185° F (-40° to 85° C)
Protection Rating	NEMA 4X
Protection Rating	IP65