Bamo MAXIMAT SHR CS Level Measuring TransducerIndonesia Industrial Parts

Bamo MAXIMAT SHR CS power supply and alarm signal relay SHR CS (DIN rail mounting) is specially designed for the new MAXIMAT leakage and overfill transmitters and liquid filling of pipes sensors CAPSYTRON SFL. It is useful with the previous range MAXIMAT SU and VK. It assures a continuous survey of the measurement loop, a LED indicates the circuit status. The alarm signal drives 2 output relays to control 2 separates systems such as a horn and a flashing light.

Bamo MAXIMAT SHR CS Features

Designed for overfill and leakage sensors
MAXIMAT®C,
MAXIMAT®VK,
MAXIMAT®LW,
CAPSYTRON SFL
DIBT Approval

Bamo MAXIMAT SHR CS Specification

Supply power:	230 V ± 10%, 50/60 Hz or 24 V DC ± 10%
Power consumption:	about 3 VA / 3 W
Ambient temperature:	-20 to +60° C
Housing:	22.5 x 75 x 110 mm, IP 40 for standard rail per DIN EN 50 022 (35 x 7.5 mm top-hat rail)
Terminals:	Screw terminals, IP 20 maximum wire cross-section 2.5 mm2
Relay outputs:	2 floating changeover contacts, maximum 250 V (50/60 Hz) 3 A, or 115 V DC, 0.5 A
Minimum load:	10 mA at 5V DC
Indicators:	green LED operation
	green LED relay pulled in
	red LED overfill/leakage alarm
	red LED interrupted circuit
	red LED short-circuit
Delay time:	release delay adjustable from 0.3 to 3 sec,
Measuring circuit:	12 V DC maximum, short circuit 110 mA maximum
	inductance <5 mH maximum
	capacitance < 0.5 ?F maximum
Measuring cable	300 m maximum, wire cross-section 0.5 mm^{2 minimum}
CE mark:	in accordance with low-voltage directive (73/23/EWG), EMC directive (89/336/CEE) and standards EN 50 082-2: 1995, EN 55 011 (class A) 1998, EN 610010-1 1993
DIBT approval:	Z-65.11-122, Z-65.13-265, Z-65.13-294, Z-65.40-201 and Z-65.40-272 for leakage and overfill detection.