Bamo MEMPRO Hydrostatic Level Transmitter works according to the hydrostatic pressure measuring principle. The output signal corresponds to the pressure of the atmosphere inside the measuring tube; The ceramic sensor is not touched by the liquid.
Bamo MEMPRO Hydrostatic Level Transmitter Features
- Continuous level measurement
- The sensor is not in contact with liquid
- Reliable even with aggressive, viscous, dirty or crystallizing liquids
- Stable measurement with a venting module
- High measuring accuracy
Application
Continuous level measurement for:
- Pressure-free containers
- Aggressive liquids
- Storage tanks
Bamo MEMPRO Hydrostatic Level Transmitter Specification
| Power supply | 12 … 28 V DC; max. 5% effective ripple |
| Ambient temperature | -20 … +60 °C |
| Liquid temperature | PVC: 0 … +60 °C |
| PP: 0 … +90 °C | |
| Output signal | 4-20 mA; 2-wire transmitter |
| Head housing | PBT, glass fiber reinforced |
| Protection: IP 65 according EN 60 529 | |
| Process connection | See ordering information |
| Measuring cell | Ceramic with EPDM sealing |
| Capacitive type with temperature compensation | |
| Measuring ranges, turndown 1:5 | |
| available for the following scales (of WATER): | |
| 0- 1,000 mm | |
| 0- 2,500 mm | |
| 0- 4,000 mm | |
| 0- 10,000 mm | |
| Accuracy | < 1% F.S. |
| Materials | Fitting BSP 2”: PVC or PP |
| Measuring tube: Same as fitting (or PVC or PP) | |
| Measuring hose: EPDM | |
| Sensor seal: EPDM |
Download Data Sheet: Hydrostatic Level Transmitter MEMPRO
Ref: bamo.eu
Other Article:
- Bamo Hydrostatic Level Transmitter MEMPRO Ex C
- Bamo MEMPRO S6.6 Hydrostatic Level Controller
- TE KPSI 710 Hydrostatic Level Transducer
- Delta Mobrey Hydrostatic Level Transmitter 9710, 9720, 9780, 9790 Series