Bamo PVDF BAMONIV Hydrostatic Level Transmitter is designed for level measurement on aggressive, viscous or contaminated liquids in non-pressurized tanks. It operates according to the principle of hydrostatic pressure measurement.
The pressure on the sensor increases proportionally with the depth of immersion. BAMONIV integrates ceramic cell and delivers a 4-20 mA signal proportional to the immersion depth. To be mounted at the bottom of a non-pressurized tank, the BAMONIV comes with a connector or a PVC cable.
Bamo PVDF BAMONIV Hydrostatic Level Transmitter Features
- Level measurement of aggressive fluids
- Measuring cell: ceramic (96 %)
- Accuracy: 0.35 % F.S.
- Ranges from 0 … 0.6 m up to 0 …10 m WC
- Fitting 1 ½” in PVDF
Application
- Diesel, lubricating oils
- Viscous, pasty liquids
- Corrosive, acidic or basic liquids
Bamo PVDF BAMONIV Hydrostatic Level Transmitter Specification
| Measuring ranges | 0… 0.6 /… / 0 … 10 m WC |
| Long term stability | ? ± 0,1 % FS / year |
| Accuracy | ? 0.35 % FS |
| Measuring cell | Ceramic AI?O? 96 % |
| Fitting material | PVDF |
| Fitting type | BSP 1 ½” – DIN 3852 |
| Seal | FPM |
| Connection | Or through a connector ISO 4400, or cable output (2 |
| m long) | |
| Power supply | 9…32VDC |
| Output signal | 4…20 mA ; 2-wire |
| Load | At 20 mA, Rmax. = (Vs – Vs min.) / 0.02 |
| Electrical protections | Reverse polarity, overload, short circuit |
| Emissions & interferences | In conformity with EN 61326 |
| Response time | ? 0.7 s |
| Overpressure | Less than 8 times the FS |
| Liquid temperature | -40 …+125 °C |
| Temperature compensation | -20 … + 80 °C |
| Temperature incidence | ±0.1%FS/10K |
| Ambient temperature | -40 … + 85 °C (without connector or cable) |
| Storage temperature | -40 …+100 °C (without connector or cable) |
| Mass | 0.2 kg |
Download Data Sheet: Hydrostatic Level Transmitter, PVDF BAMONIV
Ref: bamo.eu
Another Article:
- Bamo BAMONIV TPS Hydrostatic Level Transmitter
- Delta Mobrey Hydrostatic Level Transmitter 9710, 9720, 9780, 9790 Series
- Bamo MEMPRO Hydrostatic Level Transmitter
- TE KPSI 710 Hydrostatic Level Transducer