The WLT Meter is an excellent tool for geothermal drillers, hydrogeologists, hydrologists, aquatic biologists, ecologists and chemists, and environmental scientists.
Description Model 201 Water Level Temperature (WLT)
The Model 201 Water Level Temperature (WLT) Meter is ideal for measuring static water levels, as well as profiling temperature in wells, boreholes, tanks, and open water.
Accurate temperature measurements are displayed on an LCD readout on the faceplate, from -20ºC to +125ºC.
Water level and probe depth measurements are read off the Solinst durable laser-marked flat tape. Tape lengths are available up to 2000 ft (600 m).
Also from Solinst, the Model 107 TLC Meter measures water level, temperature and conductivity. (See Model 107 TLC Meter Data Sheet). For datalogging of water level and temperature, see the Model 3001 Levelogger 5 Data Sheet.
Water Level & Temperature Probe
The 201 Probe is made of high quality 316 stainless steel. The pressure-proof probe can be submerged the full length of the tape. The zero measurement point on the probe is close to the tip, keeping water displacement at a minimum. A probe shroud protects the sensor tip.
The temperature sensor is located at the stainless steel tip of the probe, however, since the probe body acts as a heat sink, best accuracy is obtained when the probe is completely submerged. The tape seal plug design allows the probe to be easily replaced, if required.
Features of Model 201 Water Level Temperature Meter (WLT)
- Accurately measure temperature from -20ºC to +125ºC
- Tape lengths to 2000 ft (600 m)
- Durable, corrosion and chemical-resistant flat tape
- Standard 9V alkaline battery gives 90 hours of use
- Automatic shut-off after 8 minutes
- Sturdy, standalone reel with ergonomic handle and brake
- No user calibration is required
Aplications of Model 201 Water Level Temperature Meter (WLT)
Water temperature has a direct affect on the biological activity of aquatic plants and animals, as well as many aspects of water quality and chemistry; therefore, it is an important parameter to monitor.
- Profiling temperature in wells and open water
- Detecting runoff, points of inflow, or other sources of thermal pollution
- Early warning of changes in water quality, including dissolved oxygen levels and conductivity
- Monitoring and predicting changes in aquatic environments
- Geothermal drilling and studies
What sets our Water Level Temperature Meter apart?
- Largest temperature range on the market: -20?C to 125?C
- Highest temperature resolution on the market: 0.01?C
- Longest tape lengths on the market: 600 m (2000 ft)
- Submersible to the full length of the tape
- Best complete unit Warranty on the market: 3 Years
- Temperature accuracy is:
+/-0.1ºC from -5ºC to +50ºC
+/-0.5ºC outside of that range - Laser Marked PVDF flat tape: marked every mm or 1/100 ft
- Lowest price on the market for comparable products
How can the WLT Meter be used?
- Profiling temperature in wells, tanks and surface water
- Detecting runoff, points of inflow, or other sources of thermal pollution
- Early warning of changes in water quality and chemistry, including dissolved oxygen levels and conductivity
- Monitoring and predicting changes in aquatic environments and biological activity
- Geothermal surveys
Source: www.solinst.com
Read more article:
- APG Vibrating Rod Level Switch VBL
- APG PWS Series Mini Level Paddle Wheel Switch
- Quality Gauge & Valve Boiler Gauges
- APG NLS Series Pneumatic Level Switch
- APG MLS Series Mechanical Float Switch