Hengstler 635 DIN Totalizing CounterIndonesia Industrial Parts

Description

Hengstler 635 DIN Totalizing Counter electromechanical totalizing counter has a 6-digit optical display and is equipped with DIN rail fitting. The device can operate across a broad range of voltage, which enables it to run on 5, 12 and 24 volts DC and 115 or 230 volts AC. The counter is connected up using screw terminals.

Whether you use electronic, electromechanical, mechanical or pneumatic counters, the devices available have been designed to meet your requirements. Our range extends from mini-counters through to sophisticated, programmable control counters, multifunction counters, position displays, displays, tachometers and timers. Totalizing counters tend to be used to register the number of events and display the result as a digital numerical value.

The key characteristics of this versatile range of products, as you would expect from any HENGSTLER product, are state-of-the-art technology, appealing design, quality and reliability. Examples of typical applications: Production counting, recording flow volumes.

Hengstler 635 DIN Totalizing Counter Features

DIN rail fitting
Wide range of voltages
Screw terminals
No reset

Specification

Product Family	635 DIN
Function	Totalizing counter
Technology	Electromechanical
Digits	6-digit
	7-digit
Display	6-digit
	7-digit
Preset	none
Digit Height [mm]	4 mm (0.2 in), visual
Voltage	5 VDC
	24-230 VAC/DC
Reset	without reset
Duty Cycle at 25 °C	100%
Power Consumption	at 5 VDC: 80 mW
	at 12 VDC: 200 mW
	at 24 VDC: 400 mW
	at 24 VAC: 85 mW
	at 115 VAC / VDC: 350 mW
	at 230 VAC / VDC: 665 mW
Cable Cross-Section	max. 2.5 mm2 (0.0039 in2)
Pulse Length min.	50 ms
Residual Ripple [%]	DC mode: 48 %
Supply Voltage	5, 12 and 24 VDC
	24 VAC
	115/230 VDC / VAC
Count Frequency [Hz]	10 Hz
Count Input	adding
Pulse Duty Factor Count Impulse	1:01
Electrical Connection	Screw terminals max. 2.5 mm² (0.0039 in2)
Maintenance-Free operation	10? pulses
IP Protection Class	IP 10
Operating Temperature [°C]	– 10 …+ 50 °C (+ 14 … 122 °F)
Storage Temperature [°C]	– 40 … + 85 °C (+ 14 … 122 °F)
Degree of Protection	IP 10
General Design	EN 61 010-1 / IEC 61010-1
Vibration Resistance	50 m/s² (164 ft/s²) (10 .
Shock Resistance	2000 m/s² (6561 ft/s²) (6 ms) acc. IEC 068-2-27
Protection Class	II, EN 61010-1 / IEC 61010-1
Contamination Level	V 2
	EN 50178
Size [mm]	69x26x28
Mounting Options	DIN-rail attachment
Mounting	DIN-rail attachment
Reset	without reset
Weight [g]	approx. 40 g (3.2 oz)
Mounting Position	horizontal rolling axis