SC Hydraulic Engineering L10 Double Acting Liquid Pump is a leading manufacturer and designer of an ever growing line of high pressure, air-driven liquid pumps, as well as air and gas boosters which are being used in a variety of industries and applications.
Growing since 1953, we offer liquid pressures as high as 65,000 psig and can exceed 17,000 psig in gas pressures.
General Product Information
- HIGH FLOW CAPACITY
- REQUIRES NO LUBRICATION
- DOUBLE ACTING, SINGLE STAGE
- AIR OPERATED – DOES NOT REQUIRE ELECTRICITY
- FIVE DIFFERENT PRESSURE RATIOS UP TO 25,600-PSI
The SC L10 Series pump has a 10″ diameter air cylinder with stainless steel wetted parts. This double acting pump is available in five pressure ratios and capable of hydraulic pressures up to 25,600-psi.
Nominal outlet flow ranges between 3.5-gpm to 1-gpm depending on outlet pressure and pump model. Maximum air consumption is approximately 300-SCFM at free flow (zero output pressure).
L10 Double Acting Liquid Pump Application
- Flushing rigs
- Pressure testing
- Sub-sea valve actuation
- Safety shut down valves
- Sub-surface control systems
- Blow out preventer control systems
| Dash | Actual | Max Pressure | Displacement | NPT/LF4 (Std) | SAE/LF4 (Optional) | C | D | L | |||
| Number | Ratio | psig @125 Pa (1) | Per Cycle | A Thread | B Thread | A Thread | B Thread | B Thread | |||
| Cu. In. | |||||||||||
| -15 | 20 | 2,25 | 0.27 | 3/8″ | 1/4″ | -8 SAE | -6 SAE | 7/16-20 * | 1.5 | 2.43 | 8.02 |
| -25 | 31 | 3,5 | 0.18 | 3/8″ | 1/4″ | -8 SAE | -6 SAE | 7/16-20 * | 1.5 | 2.43 | 8.02 |
| -35 | 40 | 4,375 | 0.14 | 3/8″ | 1/4″ | -8 SAE | -6 SAE | 7/16-20 * | 1.5 | 2.43 | 8.02 |
| -45 | 55 | 6,125 | 0.1 | 3/8″ | 1/4″ | -8 SAE | -6 SAE | 7/16-20 * | 1.5 | 2.43 | 8.02 |
| -65 | 79 | 8,875 | 0.069 | 1/4″ | 1/4″ | -6 SAE | -6 SAE | 7/16-20 * | 1 | 1.93 | 7.52 |
| -105 | 123 | 14 | 0.044 | 1/4″ | 1/4″ | -6 SAE | -6 SAE | 7/16-20 * | 1 | 1.93 | 7.52 |
| -125 | 138 | 15,6 | 0.044 | 1/4″ | 7/16-20 * | -6 SAE | – | – | 1 | 1.93 | 7.52 |
| -195 | 213 | 24,375 | 0.038 | 3/8″ | 9/16-18 | – | – | – | 2.24 | 2.71 | 8.75 |
Ordering
| TABLE 1 | Gas Booster Series (1) | ||
| GB | Single Stage | ||
| TABLE 2 | Modification | ||
| Blank | No Modification | ||
| M402 | Remote Pilot | ||
| 3 | EPR O-rings, Polyurethane Main Seal | ||
| TABLE 3 | Cylinder Modification | ||
| Blank | Single Head | ||
| TABLE 4 | Pressure Ratio Single or First Stage | ||
| 5 | GB | ||
| 15 | GB | ||
| 30 | GB | ||
| 75 | GB | ||
| TABLE 5 | Pressure Ratio Second Stage | ||
| Blank | N/A on GB Series | ||
| TABLE 6 | Service Option | ||
| Blank | Standard | ||
| 2 | Oxygen Service (2) | ||
| H2 | Hydrogen Service (2) | ||
| Notes : | (1) Do not fill gap on a two digit description | ||
| (2) Not available on GBD-D75, GBT-D15/75 and GBT-D30/75 models. Contact factory for more information. | |||
Performance Chart
Modification
- M002 – Remote Pilot : This option provides a 1/8″ NPT female port for remotely controlling the start/stop of the pump by connecting an external air signal to actuate the air cycling valve.
- M014 – Counter Port : This option provides a 5/8-18-UNF thread port on the air motor section of the pump for installing a mechanical cycle counter.
- M015 – High Pressure Outlet: This option provides a 9/16 O.D. tube outlet check valve port (13/16-16 UN female thread) rated for 20,000-psi.
Read more :
- SC Hydraulic Engineering 10-4 Liquid Pump
- GE Rotor Series Hydraulic
- HP Series Hydraulic Pump
- PGP/PGM 500 Series Hydraulic Pump
- Parker Hydraulic Gear Pump 20 Series
You must be logged in to post a comment.