Description
These high speed, Vickers 25M – 50M high pressure motors offer a choice of 12 torque ratings from 4,7 to 33,9 Nm/6,9 bar (42 to 300 lb. in./100 psi); speeds from 400to 3600 r/min continuous and 4000r/min intermittent; pressures to 155 bar(2250 psi) continuous and 172 bar(2500 psi) intermittent; reversible shaft rotation; flange or foot mounting.
Rotation
Shaft rotation can be reversed simply by reversing the direction of flow through the motor ports. When properly protected by valves, the motor may be used for rapid cycle reversing or stalled without damage.
Low Speed Capability
Minimum speed is normally 100 r/min. Lower speeds are obtainable, depending upon torque requirements and the nature of the load.
Low Speed Operation
Minimum speed is normally 100 r/min. Lower speeds are obtainable, depending upon torque requirements and the nature of the load.
Replaceable Cartridge
Rotary motion is developed within the drive cartridge which consists principally of a cam ring, rotor, ten vanes, and two pressure plates. the cartridge is bolted together so parts can be serviced separately or as an assembly. Replaceable cartridges permit motor overhauls in just 10 minutes. A cartridge can be replaced without removing the unit from the machine, and usually without disconnecting hydraulic lines.
Series Operation
Vickers 25M – 50M motors are suited to series applications. Inlet and outlet port scan be pressurized simultaneously without affecting service life or operating smoothness.
Indirect Drive Capability
Double-row bearings are available for increased radial load capacity. Indirect drive applications require approval by Vickers Engineering Department.
Specification
| Model | Torque | Displacement | Displacement | Maximum speeds & presures | Approx Weight |
| Series | Nm/6,9 bar | cm³/r (in³/r) | cm³/r (in³/r) | (Kg (lb) | |
| (lb in/100 psi | |||||
| 25M | 4,7 (42) | 4,39 (2.68) | 52,6 (13.9) | 3600 r/min @ 34 bar (500 psi) † | 18 (40) |
| 4000 r/min @ 34 bar (500 psi) ‡ | |||||
| 6,2 (55) | 57,7 (3.52) | 69,3 (18.3) | |||
| 7,3 (65) | 68,7 (4.19) | 82,5 (21.8) | |||
| 35M | 9,0 (80) | 83,6 (5.10) | 100,3 (26.5) | 29 (64) | |
| 10,7 (95) | 100,3 (6.12) | 120,4 (31.8) | |||
| 13,0 (115) | 121,9 (7.44) | 146,1(38.6) | |||
| 45M | 14,7 (130) | 138,0 (8.42) | 165,4 (43.7) | 2600 r/min @ 155 bar (2250 psi) † | 39 (85) |
| 3000 r/min @ 172 bar (2500 psi) | |||||
| 17,5 (155) | 163,2 (9.96) | 195,7 (51.7) | |||
| 20,9 (185) | 193,2(11.79) | 232,0 (61.3) | |||
| 50M | 24,9 (220) | 231,2 (14.11) | 277,5 (73.3) | 2800 r/min @ 34 bar (500 psi) † | 73 (160) |
| 3200 r/min @ 34 bar (500 psi) ‡ | |||||
| 2200 r/min @ 155 bar (2250 psi) † | |||||
| 2400 r/min @ 172 bar (2500 psi) ॠ| |||||
| 28,8 (255) | 268,1 (16.36) | 321,8 (85.0) | |||
| 33,9 (300) | 317,1 (19.35) | 380,4 (100.5) |
Download Datasheet: Vickers 25M – 50M Series High Speed Vane Motors
Read more article:
- Rexroth VPV hydraulic Vane Pump 3000 PSI/210 Bar
- Vickers M2U and M2-200 Series High Speed Hydraulic Vane Motors
- Norgren VS26 Pneumatic Valve Manifolds
- 53-SY SMC Pneumatic Solenoid Valves – 5 Port
- Hägglunds CAb Radial piston hydraulic motor
