P16 Series Hydraulic PumpIndonesia Industrial Parts

Description

P16 Series Hydraulic Pump Series fixed displacement gear pump offers high performance and high power density due to its part aluminum construction.

The P16 fixed displacement gear pump offers a combination of high performance and lightweight due to combining a rugged cast iron pumping section with aluminum flange and portend covers. This construction makes the P16 an ideal selection for the Mobile and Truck markets. It’s available as a single or tandem pump with options for priority flow or relief valves. A clutch pump option is also available.

Construction

Cast iron pumping sections for durability.
Aluminum body and flange for excellent power to weight ratio.
Journal bearings for long life and good over-hung load capacity.
Buna-N seals are standard for petroleum & glycol-based fluids – “Viton®” seals are optional.
Pressure balanced plates for greater efficiency.

Available Configurations

P16 – Standard.
TP16 – Tandem, 2 and 3 Place.
PVP16 – Priority Valve.
CP16 – Clutch Pump, “V” Belt and Serpentine.
TP-PVP – Combination P16 with Priority Valve.
PB16-P12 – Piggy Back.
HP16 – High Pressure.
THP16 – Tandem High Pressure.
FPR16 – Cast Iron, Bi-directional.

P16, TP16, PVP16, CP16, TP16-PVP16 Models

Fluid displacements to 3.9 cir (63.9 ccr).
Pressures to 3000 psi (206 bar).
Flow range
- 38 GPM (143.8 LPM) per section,
- the TP16 is 32 GPM (121 LPM)
Priority Flow range 2 to 10 GPM (7.5-37.8 LPM).
standard (PVP16 only).

PB16-P12 Model

Flow ranges

Front pump to 42 GPM (158.9 LPM).
Rear pump to 42 GPM (158.9 LPM).

Displacements

Rear pump to 0.90 cir (14.3 ccr).

Pressures

Front pump to 3000 psi (206 bar).
Rear pump to 2500 psi (172 bar).

HP16 & THP16 Models

Displacements to 4.8 cir (79.8 ccr).
Pressures to 3100 psi (213 bar).
Flow range to
- 46 GPM (174 LPM) per section.
- THP16 – 42 (158.9 LPM) per section.