Baumer HOG 10 Heavy Duty Incremental encoders is Heavy duty angle sensor/rotary encoder with blind hollow shaft or cone shaft. The range of pulses per revolution: 300…5000
- TTL output driver for cable length up to 550 m
- Very high resistance to shock and vibrations
- Hybrid bearing for extended service life
- Large terminal box, turn by 180° or axial terminal cover
Specification
Electrical Rating
| Voltage supply | 9…30 VDC 5 VDC ±5 % |
| Consumption w/o load | ≤100 mA |
| Pulses per revolution | 300 … 5000 |
| Phase shift | 90 ° ±20° |
| Duty cycle | 40…60 % |
| Reference signal | Zero pulse, width 90° |
| Sensing method | Optical |
| Output frequency | ≤120 kHz ≤300 kHz (on request) |
| Output signals | K1, K2, K0 + inverted Error output (option EMS) |
| Output stages | HTL-P (power linedriver) TTL/RS422 |
| Shaft insulation | Suitable up to 2.8 kV |
| Transmission length | ≤350 m at 100 kHz (HTL-P) ≤550 m at 100 kHz (TTL) |
| Interference immunity | EN 61000-6-2 |
| Emitted interference | EN 61000-6-3 |
| Approval | CE UL approval / E217823 |
Mechanical Design
| Size (flange) | ø105 mm |
| Shaft type | ø12…20 mm (blind hollow shaft) ø17 mm (cone shaft 1:10) |
| Admitted shaft load | ≤450 N axial ≤600 N radial |
| Protection DIN EN 60529 | IP 66 |
| Operating speed | ≤6000 rpm (mechanical) |
| Operating torque typ. | 6 Ncm |
| Rotor moment of inertia | 340 gcm² |
| Material | Housing: aluminium die-cast Shaft: stainless steel |
| Operating temperature | -40…+100 °C -25…+100 °C (>3072 pulses) -50…+100 °C (optional) |
| Resistance | IEC 60068-2-6 Vibration 20 g, 10…2000 Hz IEC 60068-2-27 Shock 300 g, 6 ms |
| Corrosion protection | IEC 60068-2-52 Salt mist for ambient conditions C4 according to ISO 12944-2 |
| Explosion protection | II 3 G Ex nA IIC T4 Gc (gas) II 3 D Ex tc IIIC T135°C Dc (dust) |
| Connection | Terminal box Terminal cover 2x terminal box (with option M) |
| Weight approx. | 1,6 kg 1,8 kg (with option M) |
You must be logged in to post a comment.