Gastec 600 Injection Type Gas Measurement System PropaneIndonesia Industrial Parts

Although technology is always evolving, one demand for our products never changes: the demand for customer safety. Whenever we contribute to customer safety, we are presented with an opportunity to develop further.

GASTEC holds this corporate creed of safety and development in high esteem, as it strives to grow while always putting customer safety first.

About Gastec 600 Injection Type Gas Measurement System Propane

In the No.600 System, samples are injected into detector tubes by using a syringe in order to measure gases in very high concentrations or slow chemical reactions.

Uses an injector tube to sample gas samples, which is inserted into a detector tube to perform measurements. Detector tubes used for high-concentration carbon dioxide and propane gases apply this feed-in method.

Using the injection measuring

Break off both ends of a detector tube (No.100B for No.601 syringe or No.2HT for No.611 syringe) by using the tube tip cutter.
Attach the syringe inlet to the syringe (No.601 or No.611) and collect 20ml of sample into the syringe by pulling its piston.
Insert the tube securely into the syringe inlet with the arrow pointing away from the syringe. Inject the sample collected in the syringe into the detector tube in 2 minutes (for No.100B) or 20 seconds (for No.2HT), and read the indication.
Please see the product manual for details.

Detector Tube of Gastec 600 Injection Type Gas Measurement System Propane

Substance to be measured	Tube no. & name		Measuring range (ppm)	Scale range (ppm)	No. of tests per box	Detector tube type	Notes
Propane	100B	Propane	0.1-2.0%	0.1-2.0%	10	Injection type	No.600 (Propane)