Omron E2CY-SD Proximity Sensor Non-Ferrous-Metal-Detecting

Omron E2CY-SD Proximity Sensor Non-Ferrous-Metal-Detecting

Omron E2CY-SD Proximity Sensor use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models. Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.

Omron E2CY-SD Proximity Sensor Features

  • Detects aluminum, copper, and other non-ferrous metals.
  • The product lineup includes a compact, flat Sensor Head (E2CY-V3A) and a model with fluororesin (E2CY-C2AF) for resistance to
  • Simple teaching function to easily adjust
  • Check detection status at a glance with numeric values on a digital

Rating and Specifications Sensor

Model

Item

E2CY-X1R5A E2CY-C1R5A-1 E2CY-C2A(F) E2CY-V3A
Stable sensing distance 0 to 1.5 mm 0 to 2 mm 0 to 3 mm
 

Differential travel

10% max. of sensing distance with Amplifier Unit in FINE mode

15% max. of sensing distance with Amplifier Unit in NORM mode

Detectable object Non-ferrous metal
Standard sensing object Aluminum: 8 ´ 8 ´ 1 mm Aluminum:

12 ´ 12 ´ 1 mm

Response frequency *1 40 Hz min. with Amplifier Unit in FINE mode 100 Hz min. with Amplifier Unit in NORM mode
Ambient temperature range Operating: -10 to 55°C, Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range Operating and Storage: 35% to 95% (with no condensation)
 

 

 

Temperature influence *2

 

10 to 55°C

±15% max. of sensing distance at 23°C  

 

±10% max. of sensing distance at 23°C

±15% max. of sensing distance at 23°C
 

0 to 40°C

±10% max. of sensing distance at 23°C *3 ±10% max. of sensing distance at 23°C
 

Vibration resistance

Destruction: 10 to 500 Hz, 2-mm double am- plitude or 150 m/s2 for 2 hours each in X, Y, and Z directions
Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP67
Connection method Pre-wired Models (High-frequency coaxial cable, Standard cable length: 3 m)
Cable length compensation 0.5 to 5 m *4
Weight (packed state) Approx. 35 g
 

 

 

 

Materials

Case Stainless steel Zinc die-cast
Sensing surface Heat-resistant ABS (E2CY-C2AF: Fluororesin)
Cable Soft PVC (E2CY-C2AF: Fluororesin)
Clamping nut Nickel-plated brass (E2CY-X1R5A only)
Toothed washer Zinc-plated iron (E2CY-X1R5A only)
Mounting screws Zinc-plated iron (E2CY-V3A only)

 

Another Article:

Omron E2CY-SD Proximity Sensor Amplifier Units

Item                 Model E2CY-SD11
Power supply voltage 12 to 24 VDC ±10%, ripple: 10% max.
Power consumption 1,080 mW max. (45 mA max. at 24 VDC)
Sensing distance adjustment range 10% min. of stable sensing distance
Sensitivity setting Teaching / manual adjustment
Control output NPN open collector (26.4 VDC max.), load cur- rent:100 mA max., residual voltage: 1 V max.
 

 

 

 

 

Functions

OFF-delay timer 0 to 40 ms (1 to 20 ms: 1-ms increments, 20 to 40 ms: 5-ms increments)
Zero reset Supported.
Intial reset Supported. (All settings are returned to their default values.)
Hysteresis setting 3 to variable
Self diagnosis Displays errors (sensor disconnection, sen- sor short-circuit, or output short-circuit)
Operation mode Changed with NO/NC switch.
Protection circuits Power supply reverse polarity protection and output short-circuit protection
Indicator Operation indicator (orange)
Digital display *1 Detection amount display (FINE: 4,000 max., NORM: 2,000 max.), bar display, function display (red)
Reverse display Supported.
Ambient temperature range Operating: -10 to 55°C, Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range Operating and storage: 35% to 85% (with no condensation)
Temperature influ- ence *2 ±10% max. of sensing distance at 23°C in the temperature range of -10 to 55°C
Voltage influence ±1% max. of sensing distance in the rated voltage range ±10%
Insulation resistance 20 MÙ min. (at 500 VDC) between current- carrying parts and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute. between current-carrying parts and case
 

Vibration resistance

Destruction: 10 to 150 Hz, 1.5-mm double amplitude or 100 m/s2 for 2 hours each in X, Y, and Z directions
Shock resistance Destruction: 300 m/s2 3 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP50 (with Sensor cable con- nected and protective cover attached)
Connection method Pre-wired Model (Standard cable length: 2 m)
Weight (packed state) Approx. 100 g
 

 

Materials

Case PBT
Cover Polycarbonate
Cable connecting screws  

Zinc-plated iron

Accessories E39-L143 Mounting Bracket (SUS304 stainless steel), instruction manual

Download Catalog: Non-Ferrous-Metal-Detecting Proximity Sensor (Separate Amplifier Type) E2CY-SD

Ref: Omron.co.id or More Article

Share
%d bloggers like this: