Omron E2EZ Chip Immune Inductive Proximity Sensor

Omron E2EZ Chip Immune Inductive Proximity Sensor use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models.

OMRON Sensing Components detect, measure, analyze, and process various changes that occur on production sites, such as changes in position, length, height, displacement, and appearance. They also contribute to predicting and preventing future events.

Omron E2EZ Chip Immune Inductive Features and Benefits

  • Correct operation even with aluminum or iron chips sticking to the Sensor
  • Only the sensing object is detected.
  • Pre-wired Smart click Connector Models also

Another Article:

Rating and Specifications

Model

Item

E2EZ-X2D@-N E2EZ-X2D@-M1J E2EZ-X2D@-M1GJ E2EZ-X4D@-N E2EZ-X4D@-M1J E2EZ-X4D@-M1GJ E2EZ-X8D@-N E2EZ-X8D@-M1J E2EZ-X8D@-M1GJ E2EZ-X4C1 E2EZ-X4B1 E2EZ-X4B1-M1J E2EZ-X8C1 E2EZ-X8B1 E2EZ-X8B1-M1J
Sensing distance 2 mm ±10% 4 mm ±10% 8 mm ±10% 4 mm ±10% 8 mm ±10%
Set distance *1 0 to 1.6 mm 0 to 3.2 mm 0 to 6.4 mm 0 to 3.2 mm 0 to 6.4 mm
Differential travel 20% max. of sensing distance
Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 4.)
Standard sensing object Iron, 12 ´ 12 ´ 1 mm Iron, 30 ´ 30 ´ 1 mm Iron, 54 ´ 54 ´ 1 mm Iron, 30 ´ 30 ´ 1 mm Iron, 54 ´ 54 ´ 1 mm
Response frequency *2 200 Hz 100 Hz 30 Hz 12 Hz 8 Hz
Power supply volt- age

(operating voltage range)

 

12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.

 

12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.

Current consumption 15 mA max.
Leakage current 0.8 mA max.
 

Con- trol output

Load cur- rent  

3 to 100 mA max.

NPN open-collector output/PNP open-collector output 100 mA max. at 12 VDC (30 VDC max.)

200 mA max. at 24 VDC (30 VDC max.)

Residual voltage 3 V max. (Load current: 100 mA, Cable length: 2 m) 2 V max. (Load current: 200 mA, Cable length: 2 m)
Indicators D1 Models: Operation indicator (red), Setting indicator (green) D2 Models: Operation indicator (red) Detection indicator (red)
Operation mode (with sensing ob- ject approaching) D1 Models: NO D2 Models: NC

For details, refer to the Timing chart on page 5.

NO

For details, refer to the Timing chart on page 5.

Protection circuits Load short-circuit protection, Surge suppressor Load short-circuit protection, Reverse polarity protection, Surge suppressor
Ambient temperature range Operating/Storage: 0 to 50°C (with no icing or condensation)
Ambient humidity range Operating/Storage: 35% to 95% (with no condensation)
Temperature influence ±20% max. of sensing distance at 23°C in the temperature range of 0 to 50°C
Voltage influence ±2.5% max. of sensing distance at rated voltage in the rated voltage ±10% range
Insulation resistance 50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP67, in-house standards: oil-resistant
Connection method Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models
 

Weight (packed state)

E2EZ-X2D@-N: Approx. 70 g

E2EZ-X2D@-M1J: Approx.

40 g

E2EZ-X2D@-M1GJ:

Approx. 40 g

E2EZ-X4D@-N: Approx. 160 g

E2EZ-X4D@-M1J:

Approx. 90 g

E2EZ-X4D@-M1GJ:

Approx. 90 g

E2EZ-X8D@-N: Approx. 220 g

E2EZ-X8D@-M1J:

Approx. 160 g E2EZ-X8D@-M1GJ:

Approx. 160 g

 

 

Approx. 170 g

 

 

Approx. 270 g

 

 

 

Materi- als

Case Nickel-plated brass
Sensing surface PBT Heat-resistant ABS
Clamp- ing nuts Zinc-plated iron
Toothed washer Zinc-plated iron
Accessories Instruction manual

Download Catalog: E2EZ, Omron-Chip-immune Inductive Proximity Sensor

Ref: omron.co.id

Share