Seametrics PS9800 Pressure and Optional Temperature SensorsIndonesia Industrial Parts

Description

Seametrics PS9800 Pressure and Optional Temperature Sensor are rugged and accurate with great noise immunity, transient protection, and thermal performance. These pressure sensors have been designed to provide trouble-free submersible operation in liquid environments.

The pressure is measured with an extremely rugged and stable piezo-electric, media isolated pressure element and calibrated with well-established calibration procedures and NIST traceable equipment.

Seametrics PS9800 Feature

Pressure (temperature optional)
± 0.1% FSO accuracy
Lower power (9-30Vdc)
Small diameter—0.75” (1.9cm)
1/4” NPT end cone adapter option (300psi max.)

The PS9800 sensors are thermally compensated, making them great where water temperatures vary, as they are thermally stable (2% over 50 degrees standard). These industry-standard, 2-wire, 4-20mA devices offer reverse polarity protection, under- and over-current limitation, and built-in transient protection.

Application

Pump and slug tests
River, stream, reservoir gauging
Stormwater runoff monitoring
Wetland Monitoring
Well, tank, tidal levels
Flow monitoring
Water resource management
Landfill leachate levels
Control applications

Seametrics PS9800 Specification

Housing & Cable	Weight	0.8 lb. (0.4 kg)
	Lenght	8.44” (21.4 cm)
	Diameter	0.75” (1.9 cm)
	Body Material	Acetal and 316 stainless or optional titanium
	Wire Seal Material	Fluoropolymer and PTFE
Cable	Cable	Submersible: Polyurethane, polyethylene, or ETFE available
	Desiccant	1-3 mm indicating silica gel
	Storage Range	Field Connector
Operating Temperature Range		Recommended: -5 ? to 70 ?C (23 ? to 158 ?F) Requires freeze protection if using in the water below freezing.
Transmitter Voltage		9-24Vdc (100ms warmup)
Output		4-20mA
Output Channels		Temperature (Optional)	Pressure¹
	Element	Thermistor	Silicon strain gauge transducer, 316 stainless or Hastelloy
	Accuracy	±0.3 ?C (typical at 25 ?C)	±0.1% FSO (static, B.F.S.L. 20 ?C)
		±0.75 ?C (maximum at 25 ?C)
	Range	0 ? to 50 ?C (32 ? to 122 ?F)	Gauge	PSI: 5, 15, 30, 50, 100, 300
				FtH?O: 12, 35, 69, 115, 231, 692
				mH?O: 3.5, 10.5, 21, 35, 70, 210
			Absolute²	PSI: 30, 50, 100, 300
				FtH?O: 35, 81, 196, 658
				mH?O: 10, 24, 59, 200
	Compensated	—	0 ? to 50 ?C (32 ? to 122 ?F)
Max operating pressure		1.1 x FS
Burst pressure		3.0 x FS (for >300 psi (650ft, 200m) contact Seametrics representative)
Regulatory